TAILIEUCHUNG - Lecture CCNP Switch: Implementing IP switching - Chapter 3: Implementing Spanning Tree

Spanning Tree Protocol is a fundamental protocol to prevent Layer 2 loops and at the same time provide redundancy in the network. This chapter covered the basic operation and configuration of RSTP and MST. | Chapter 3: Implementing Spanning Tree CCNP SWITCH: Implementing IP Switching 1 Cisco Networking Academy Program CCNP SWITCH: Implementing IP Switching Chapter 3: Implementing Spanning Tree Chapter 3 Objectives Describe spanning tree protocols. Describe and configure RSTP. Describe and configure MST. Configure STP features to enhance resiliency and prevent forwarding loops. Explain recommended STP configurations and practices. Troubleshoot spanning tree issues. 2 Chapter 3 Objectives Spanning Tree Protocol Basics STP uses the concepts of root bridges, root ports, designated, and non-designated ports to establish a loop-free path through the network. STP forces certain ports into a standby state so that they do not listen to, forward, or flood data frames. The overall effect is that there is only one path to each network segment that is active at any time. If there is a problem with connectivity to any of the segments within the network, STP or RSTP reestablishes connectivity by .

TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.