TAILIEUCHUNG - Chapter 7 - Implementing IP Addressing Services

Static NAT – Mapping an unregistered IP address to a registered IP address on a one-to-one basis. Particularly useful when a device needs to be accessible from outside the NAT – Maps an unregistered IP address to a registered IP address from a group of registered IP addresses. Dynamic NAT also establishes a one-to-one mapping between unregistered and registered IP address, but the mapping could vary depending on the registered address available in the pool, at the time of communication | Chapter 7 - Implementing IP Addressing Services Mlllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllll BflCHKHOfl NETWORKING KflOEHY CCNA Exploration 111 111. CISCO 1 Introducing DHCP Manual Configuration Dynamic Configuration NetWork devices that remain in Ibe same place logically and physically J are assigned static IP addresses. Network devices that are added moved or changed physical and logical J need now addresses. Manna configuration Is Unwieldy. Học viện mạng Bach Khoa - Website 2 DHCP Operation IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIN BACHKHOA NETWORKING ACADEMY DHCPDISCOVER Broadcast DHCPREQUEST Broadcast I have looked your otter over and I hike it. Unicast DHCP ACK We are good to got Here Is your configuration. Manual Allocation IF address . efault gateway 152xlÉ0xlŨxl DK SRri era Lease Tins 3 days Automatic Allocation Dynamic Allocation Học viện mạng Bach Khoa - Website

• Quản trị mạng
• CCNA Exploration
• Network
• Cisco Enterprise Architecture
• The Topology
• Network Security
• Serial Communications
• CCNA Exploration 4
• Network Centric World
• Data Networking Role
• Network architecture design
• Data networking
• Lecture CCNA Exploration 4
• Communicating over the Network
• Network structure
• Network types
• Network communication
• Data Networks
• Supporting communication
• Application Layer Functionality
• Application Layer Services
• OSI Transport Layer
• Transport layer protocols
• Transport Layer role
• Managing TCP sessions
• OSI Network Layer
• Network Layer Protocols
• Internet Protocol
• Devices into networks
• Network Fundamentals
• Addressing the Network
• IP addressing structure
• IPv4 addresses
• Data Link Layer
• Data Link layer protocols
• Media access control methods
• OSI Physical Layer
• Physical layer protocols
• Physical layer signaling
• Network media
• Network media used in Ethernet
• Features of Ethernet
• Media access control method
• LAN connection
• Network designs
• Cabling Networks
• Internetwork Operating System
• Perform Basic Router
• Switch Configuration
• Configuring Network
• Packet forwarding
• Routing process
• Routing table
• Switches packets
• Lecture CCNA Exploration
• Static Routing
• CDP protocol
• Exit interfaces
• Dynamic Routing Protocol
• Classifying Routing Protocols
• Administrative distance
• Distance Vector routing protocols
• Routing Information Protocol
• Network discovery
• Routing table maintenance
• RIP version 1
• Basic RIPv1 configuration
• Automatic summarization
• Routed network
• Classless IP addressing
• Classless Inter Domain Routing
• Classful IP addressing
• RIP version 2
• RIPv1 limitations
• Configuring RIPv2
• The routing table
• Routing Table structure
• Classful routing behaviors
• Classless routing behaviors
• Enhanced Interior Gateway Routing Protocol
• EIGRP configuration
• EIGRP Metric Calculation
• EIGRP Message Format
• Link State Routing
• Link State Routing Protocols
• IP address
• Background of OSPF
• OSPF configuration
• OSPF Characteristics
• Backup Designated Router
• Hierarchical Network Supports
• LAN Design
• Hierarchical network design model
• Hierarchical network model
• Ethernet 802
• 3 networks
• Media Access Control
• Ethernet Slot Time
• Ethernet frame structure
• Converged network
• Trunking VLANs
• Configure VLANs
• Converged network topology