TAILIEUCHUNG - Lecture CCNA Exploration 4.0 (Kỳ 1) - Chapter 10: Planning and Cabling Networks

Learning objectives of this chapter include: Identify the basic network media required to make a LAN connection; identify the types of connections for intermediate and end device connections in a LAN; design an addressing scheme for an inter-network and assign ranges for hosts, network devices and the router interface; compare and contrast the importance of network designs. | Planning and Cabling Networks Network Fundamentals - Chapter 10 CISCO Objectives Planning Cabling a Network Học viện mạng Bach Khoa - Website Objectives Identify the basic network media required to make a LAN connection. Identify the types of connections for intermediate and end device connections in a LAN. - Identify the pin out configurations for straight-through and crossover cables. - Identify the different cabling types standards and ports used for WAN connections. - Define the role of device management connections when using Cisco equipment. Design an addressing scheme for an inter-network and assign ranges for hosts network devices and the router interface. Compare and contrast the importance of network designs Học viện mạng Bach Khoa - Website .

• Quản trị mạng
• CCNA Exploration
• Lecture CCNA Exploration 4
• Network Fundamentals
• LAN connection
• Network designs
• Cabling Networks
• CCNA Exploration 4
• Network Centric World
• Data Networking Role
• Network architecture design
• Data networking
• Communicating over the Network
• Network structure
• Network types
• Network communication
• Data Networks
• Supporting communication
• Application Layer Functionality
• Application Layer Services
• OSI Transport Layer
• Transport layer protocols
• Transport Layer role
• Managing TCP sessions
• OSI Network Layer
• Network Layer Protocols
• Internet Protocol
• Devices into networks
• Addressing the Network
• IP addressing structure
• IPv4 addresses
• Data Link Layer
• Data Link layer protocols
• Media access control methods
• OSI Physical Layer
• Physical layer protocols
• Physical layer signaling
• Network media
• Network media used in Ethernet
• Features of Ethernet
• Media access control method
• Internetwork Operating System
• Perform Basic Router
• Switch Configuration
• Configuring Network
• Packet forwarding
• Routing process
• Routing table
• Switches packets
• Lecture CCNA Exploration
• Static Routing
• CDP protocol
• Exit interfaces
• Dynamic Routing Protocol
• Classifying Routing Protocols
• Administrative distance
• Distance Vector routing protocols
• Routing Information Protocol
• Network discovery
• Routing table maintenance
• RIP version 1
• Basic RIPv1 configuration
• Automatic summarization
• Routed network
• Classless IP addressing
• Classless Inter Domain Routing
• Classful IP addressing
• RIP version 2
• RIPv1 limitations
• Configuring RIPv2
• The routing table
• Routing Table structure
• Classful routing behaviors
• Classless routing behaviors
• Enhanced Interior Gateway Routing Protocol
• EIGRP configuration
• EIGRP Metric Calculation
• EIGRP Message Format
• Link State Routing
• Link State Routing Protocols
• IP address
• Background of OSPF
• OSPF configuration
• OSPF Characteristics
• Backup Designated Router
• Hierarchical Network Supports
• LAN Design
• Hierarchical network design model
• Hierarchical network model
• Ethernet 802
• 3 networks
• Media Access Control
• Ethernet Slot Time
• Ethernet frame structure
• Converged network
• Trunking VLANs
• Configure VLANs
• Converged network topology