TAILIEUCHUNG - Introduction to IP and ATM Design Performance - Part 2

Trong chương 3, chúng ta đã thấy như thế nào teletraffic kết quả kỹ thuật đã được được sử dụng để mạng viễn thông chuyển mạch kích thước. ATM là một định hướng kết nối mạng viễn thông, và chúng ta có thể (chính xác) dự đoán có thể sử dụng những phương pháp này để điều tra kết nối, mức độ hành vi , sự khác biệt lớn giữa các chuyển mạch mạng và ATM là các kết nối ATM bao gồm một dòng tế bào, nơi mà thời gian giữa các tế bào này sẽ thường biến (tại bất cứ thời điểm nào đó trong. | Introduction to IP and ATM Design Performance With Applications Analysis Software Second Edition. J M Pitts J A Schormans Copyright 2000 John Wiley Sons Ltd ISBNs 0-471-49187-X Hardback 0-470-84166-4 Electronic PART II ATM Queueing and Traffic Control Introduction to IP and ATM Design Performance With Applications Analysis Software Second Edition. J M Pitts J A Schormans Copyright 2000 John Wiley Sons Ltd ISBNs 0-471-49187-X Hardback 0-470-84166-4 Electronic 7 Basic Cell Switching up against the buffers THE QUEUEING BEHAVIOUR OF ATM CELLS IN OUTPUT BUFFERS In Chapter 3 we saw how teletraffic engineering results have been used to dimension circuit-switched telecommunications networks. ATM is a connection-orientated telecommunications network and we can correctly anticipate being able to use these methods to investigate the connection-level behaviour of ATM traffic. However the major difference between circuit-switched networks and ATM is that ATM connections consist of a cell stream where the time between these cells will usually be variable at whichever point in the network that you measure them . We now need to consider what may happen to such a cell stream as it travels through an ATM switch it will in general pass through many such switches as it crosses the network . The purpose of an ATM switch is to route arriving cells to the appropriate output. A variety of techniques have been proposed and developed to do switching but the most common uses output buffering. We will therefore concentrate our analysis on the behaviour of the output buffers in ATM switches. There are three different types of behaviour in which we are interested the state probabilities by which we mean the proportion of time that a queue is in a particular state being in state k means the queue contains k cells over a very long period of time . the steady-state probabilities the cell loss probability by which we mean the proportion of cells lost over a very long period of time and the .

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.