TAILIEUCHUNG - New Fabrication Techniques For Optical Fibre Sensors And Lasers

The hole closing reported in this letter is certainly not caused by deposition of carbon-rich material by the electron beam, a common phenomenon in electron microscopy. The observation that large pores expand is in direct contradiction with potential contamination growth. Secondly, electron-energy-loss spectra (EELS) locally obtained on the material that filled a nanopore clearly show the presence of silicon and oxygen,but the absence of any carbon (detection limit was less than 2%). The power of our technique lies in the possibility of fine-tuning the diameter of nanopores with unprecedented precision. By lowering the beam intensity or blanking it, the shrinking process can be stopped within seconds when the desired diameter.

TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.