TAILIEUCHUNG - Applied Clay Mineralogy Phần 5

Những thông tin từ khoan khoan và cốt lõi cung cấp độ dày và loại quá tải và chất lượng và độ dày của cao lanh, do đó tỷ lệ tước có thể được xác định. | 68 Applied Clay Mineralogy the wider spaced drilling indicates that the size and quality of the deposit is sufficient to warrant mining then close spaced drilling is done Table 10 . The information from the auger and core drilling provides the thickness and type of overburden and the quality and thickness of the kaolin so that the stripping ratio can be determined. The stripping ratio is the overburden thickness over the kaolin thickness. Stripping ratios determine whether or not mining the deposit is economical. The lower the ratio the lower the cost of mining. The drilling program also is used to evaluate potential groundwater problems if the water table is high or if there is artesian water in sand bodies immediately under the kaolin bed. In kaolin or bentonite deposits of hydrothermal origin the drill hole locations are based on the topography and shape and size of the alteration zone. Fig. 23 shows the configuration of a hydrothermal kaolin deposit in the Cornwall area of southwestern England which requires a special drill hole pattern to delineate the deposit. Flat lying bentonite deposits are also drilled using a grid pattern but if the deposits are steeply dipping or structurally deformed then special drilling patterns are used. Auger drilling bentonite deposits are much more commonly used than core drilling. The same is true for drilling palygorskite and sepiolite deposits. Normally the palygorskite and sepiolite deposits are flat lying as are ball clay deposits. They are sedimentary clays that were deposited in lacustrine swamp or tidal flat environments and are located in areas that have not been deformed by mountain building faulting and folding. 1. KAOLIN MINING AND PROCESSING Once a mine plan has been determined after the drilling is completed the land is cleared and the removal of overburden begins. Open pit methods of mining are used in the major kaolin deposits around the world. A variety of stripping methods is used including hydraulic backhoes .

TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.