TAILIEUCHUNG - Analysis of aquacrop model for potato crop under different irrigation levels

A field experiment was conducted at Plasticulture Farm, CTAE, MPUAT, Udaipur (Rajasthan) to calibrate and validate AquaCrop model for potato crop during rabi season from October, 2017 to February, 2018. Three levels of irrigation based on ETc at 100% ETc (I1), 80% ETc (I2), and 60% ETc (I3) were combined with no-mulch (M1) treatment as control and two mulch treatments BP mulch (M2), PPW mulch (M3) laid out with three replications in factorial randomized block design (FRBD). Part of the obtained field data . data for full irrigation treatment (100% ETc under no-mulch – T1) was used for calibration of the model, while the remaining data of remaining treatments were used to validate the model. | Analysis of aquacrop model for potato crop under different irrigation levels

TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.