TAILIEUCHUNG - A method of skin frictional resistant reduction by creating small bubbles at bottom of ships

The method of skin frictional resistant reduction is injecting air flows to creating small bubbles into the turbulent boundary layer developing on the ship skin. Research found that this method may reduce ship energy consumption. This method could be applied to large ships with not high speed movement. A model ship that is scaled 1/33 of a 20000 ton cargo ship had been created for carrying out experiment in calm water and in regular wave conditions. | Volume 35 Number 4 4 Vietnam Journal of Mechanics, VAST, Vol. 35, No. 4 (2013), pp. 325 – 333 A METHOD OF SKIN FRICTIONAL RESISTANT REDUCTION BY CREATING SMALL BUBBLES AT BOTTOM OF SHIPS Phan Anh Tuan, Pham Thi Thanh Huong, Vu Duy Quang∗ Hanoi University of Science and Technology, Vietnam ∗ E-mail: Abstract. Most of ship energy consumption spends for its propulsive device to create a propulsive force that helps the ship to win its resistant force to move forward or backward. The ship resistant is including skin frictional resistant force, wave-making resistant force and wind resistant force. This paper mentions to a method of skin frictional resistant reduction by creating small bubbles at bottom of ships. When a ship moves on/under water surface, for skin resistant force to be generated, the ship must be in contact with the water. Skin frictional resistant force is generated by the difference in velocity between the ship and the water. Frictional resistant force will act in the direction opposite to the direction of motion of the ship. The method of skin frictional resistant reduction is injecting air flows to creating small bubbles into the turbulent boundary layer developing on the ship skin. Research found that this method may reduce ship energy consumption. This method could be applied to large ships with not high speed movement. A model ship that is scaled 1/33 of a 20000 ton cargo ship had been created for carrying out experiment in calm water and in regular wave conditions. Authors found that the highest effect from creating small bubble method on reduction ship energy consumption in calm water is and in regular wave is . Keywords: Energy consumption, skin frictional resistant, small bubbles, turbulent boundary layer, ship model. 1. INTRODUCTION Comparison with other transporters, ship is the most energy-saving transporter. For example, a very large cargo carrier (VLCC) of 280,000 DW (dead weight) can run at .

• Cơ khí - Chế tạo máy
• Vietnam Journal of Mechanics
• A method of skin frictional resistant reduction
• Creating small bubbles at bottom of ships
• Skin frictional resistant reduction
• Regular wave conditions
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure