TAILIEUCHUNG - Using u-bolt for fixing the axle of elevator deviation pulleys

This paper presents some results of research concerning the calculation of u-bolts for above mentioned purpose with goal to ensure elevator safe performance. Different angles of contact between the rope and the traction pulley were considered to estimate their influence on the stress in the u-bolt and the standard bolt, then gives some recommendations when choosing or making u-bolts for fixing the deviation pulley axle. | Journal of Science & Technology 122 (2017) 012-016 Using U-Bolt for Fixing the Axle of Elevator Deviation Pulleys Trinh Dong Tinh Hanoi University of Science and Technology, No. 1, Dai Co Viet, Hai Ba Trung, Hanoi, Viet Nam Received: March 24, 2017; Accepted: November 03, 2017 Abstract Deviation pulleys are used on the elevator traction machines to ensure given distance between the suspension ropes attached to elevator car and counterweight or/and to increase the number of suspension rope falls (roping 2:1 or 4:1). With simple structure, the u-bolts are used widely to fix the axle of these pulleys. In many cases, these bolts are selected or made approximately and it can lead to inadequate selection. This paper presents some results of research concerning the calculation of u-bolts for above mentioned purpose with goal to ensure elevator safe performance. Different angles of contact between the rope and the traction pulley were considered to estimate their influence on the stress in the u-bolt and the standard bolt, then gives some recommendations when choosing or making u-bolts for fixing the deviation pulley axle. Keywords: U-bolt, Rope deviation pulley, Elevator 1. Introduction * specific cases of using the u-bolts are analyzed [1, 2], but the method of adequate selection of the u-bolts are not shown. Fig. 1 presents a typical configuration of electric elevator with traction drive. The car and counterweight are connected to each other by the steel ropes through traction and deviation pulleys. The traction pulley is mounted on the output shaft of the motor or the reduction box and transfers power to the ropes, so the car/counterweight can move up and down. The deviation pulleys are mounted on the traction machine to fulfill the given distance between suspension ropes at the car and the counterweight, also on the car/counterweight to increase the number of rope falls, which leads to increase of the rope diameter and dimensions of the traction machine, and also

• Cơ khí - Chế tạo máy
• Journal of Science and Technology
• Using u bolt for fixing the axle
• Elevator deviation pulleys
• The traction pulley
• Ensure elevator safe performance
• Journal of Marine science and Technology
• Marine science and Technology
• Marine science and Technology no 56
• Marine science and Technology year 2018
• Evaluation method
• Electrical energy management model
• Marine science and Technology no 53
• Diesel engines
• Journal of Fisheries science and Technology
• Fisheries science and Technology
• Fisheries science and Technology no 3
• Fisheries science and Technology year 2016
• Striped catfish
• Common carp cyprinus carpio
• Fisheries science and Technology no 4
• Fisheries science and Technology year 2018
• Coastal fi shing activities
• White striped cleaner shrimp
• Journal of Science
• Journal of Technology
• Technology Management
• Science and Technology
• International integration
• Science and Technology Strategy
• Evaluation of science and technology
• Global journal of computer science
• Global journal of computer science and technology
• Information & technology
• GIS based fire emergency response system
• Marine science and technology no 61
• Actual GPS receivers
• Display information on stability
• Nuclear science and technology
• The journal of Nuclear science and technology
• Rotary rack served for elemental concentration
• Seawaterusing co precipitation method
• Natural radionuclides
• Experimental data
• Low energy experiments
• Multigroup cross sections
• Stable isotopic values
• Radial blanket
• Dissolved nitrogen compounds
• Irradiation channels
• Neutron rich nuclei
• Prescila neutron probe
• Full core conversion
• Multipurpose research reactor
• Aquatic environment
• Geochemical parameters
• External reactor vessel cooling method
• Radiation crosslinked scaffolds
• Adipose derived stem cell culture
• Treatment plans
• Minor actinide compositions
• IM NAA of non standard geometrical samples
• Cross shaped obstacle
• University entrepreneurship
• Entrepreneurial research university
• Technology innovation
• Industry university cooperation
• Regional innovation
• Journal of technology and science education
• Bring science and technology closer to secondary school
• Technology closer to secondary school
• Secondary school teachers
• Face to face
• Technology development
• Technology commercialization
• The role of informal science centers in science education
• Informal science center
• Attudes toward science
• Scientfic thinking skills
• Scientific research
• Research quality
• Strategy and policy
• Research Organizations
• Policy Planning
• Science and Technology development
• Theory Z
• Human Resources
• Development policy of Japan
• ‘Standards’ on the bench
• Technological literacy render an adequate image of technology
• Adequate image of technology
• Standards for technological literacy
• Philosophy of technology
• The nature of technology
• Concepts of technology
• Post secondary project based learning in science
• Post secondary project based learning in technology
• Post secondary project based learning in engineering and mathematics
• Post secondary project