TAILIEUCHUNG - DETERMINATION OF VOLATILE ORGANIC COMPOUNDS (VOC) IN CONSUMER PRODUCTS AND REACTIVE ORGANIC COMPOUNDS IN AEROSOL COATING PRODUCTS

We are giving increasing prominence to environmental ‘performance indicators’ as complements to traditional emission limits. Emission data can be normalised for the scale of process operation and/or environmental burden to generate performance data that are valuable in targeting regulatory effort at the most important environmental issues. Performance indicators can address not only emissions (to air, water and waste) but also raw material use (including water and energy). Applicants should give consideration to appropriate performance indicators for their installation, whilst avoiding claims for commercial confidentiality on product volumes. . | California Environmental Protection Agency Air Resources Board METHOD 310 DETERMINATION OF VOLATILE ORGANIC COMPOUNDS VOC IN CONSUMER PRODUCTS AND REACTIVE ORGANIC COMPOUNDS IN AEROSOL COATING PRODUCTS Including Appendices A and B Adopted September 25 1997 Amended September 3 1999 Amended July 18 2001 Amended May 5 2005 Amended August 6 2010 Amended September 29 2011 DISCLAIMER Mention of any trade name or commercial product in Method 310 does not constitute endorsement or recommendation of this product by the Air Resources Board. METHOD 310 DETERMINATION OF VOLATILE ORGANIC COMPOUNDS VOC IN CONSUMER PRODUCTS AND REACTIVE ORGANIC COMPOUNDS IN AeRoSoL coating PRODUCTS 1 APPLICABILITY This method Method 310 applies to the determination of the percent by weight of 1 volatile organic compounds VOC in consumer products antiperspirant and deodorant products and aerosol coatings products as those terms are defined in Title 17 California Code of Regulations CCR Division 3 Chapter 1 Subchapter Consumer Products commencing with section 94500 and 2 low vapor pressure-volatile organic compounds LVP-VOC as that term is defined in section 94508 a and 3 the reactive organic compounds ROC contained in aerosol coating products as that term is defined in Title 17 CCR section 94521. Method 310 determines the total volatile material in a product and the presence of any compounds prohibited by ARB regulations prohibited compounds . Components of the product that do not meet the definition of a VOC or are exempted by ARB regulations for a specific product category exempt compounds are subtracted from the total volatile material to determine the final VOC content for the product. Method 310 is also used to determine the percent by weight of the ROCs contained in aerosol coating products for the purpose of determining compliance with the Regulation for Reducing the Ozone Formed from Aerosol Coating Product Emissions Title 17 CCR sections 94520 to 94528 the Aerosol Coatings .

• Hoá dầu
• Biotechnological Solutions
• Enhancing
• Aluminium Resistance
• Crop Plants
• Soil Bacteria
• Support and Protect