TAILIEUCHUNG - ADC KRONE - Hot Sheet - 10GBase-T - Competitive Comparison ADC vs. Belden

Tham khảo tài liệu 'adc krone - hot sheet - 10gbase-t - competitive comparison adc vs. belden', công nghệ thông tin, quản trị mạng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | ADC CopperTen™ vs. Belden IBDN 10 Gigabit Structured Cabling Product Product Feature Comments ADC CopperTen™ +/- +/- Belding IBDN Cable Better fi ll ratios and smaller cable .295” nominal OD .315 nominal OP Construction +- bundles with ADC’s design. It has been demonstrated that Patch Cord Uses an un-grounded screened ungrounded screens and shields True UTP construction Construction +-patch cord. do more harm than good in real networks. Patch Cord ADC design is more fl exible and 24 AWG Stranded 23 AWG Solid Connector Wire Type +- reliable than solid conductor designs. Contact Plating Gold (50 microinches) ++Gold (50 microinches) IDC ADC jacks can be terminated up to 200+ reterminations on all connections. 20 reterminations Reterminations +- 1000 times. Simple split beam. Retains wire Patented 45-degree angle. Retains wire by only one set of axial forces. Contact design is why ADC is the Contact by 3-point unique axial and torsional +-IDC’s are at 90-degree angles to industry standard in over 80 countries forces for better connectivity. reduce Alien NEXT, but makes it throughout the world. diffi cult to terminate. IDC Contact This allows ADC to be used in humid Silver +-Nickel or otherwise harsh environments Plating without gel or other modifi cations. Spring Contact Belden 10G jack uses a PCB instead Gold (50 microinches) +-Gold (50 microinches) of springs, making their connection Plating less reliable. COMPETITVE COMPARISON Product Product Feature Comments ADC CopperTen™ +/- +/- Belding IBDN Double Two per termination point of same gauge Allows easy looping of stations for No Punching (22 to 26 AWG) +- applications such as Local Talk. IDC Contact Does not corrode. Silver tarnish is highly Will tarnish, which is non- Additionally, tarnish is soft and will Oxidation conductive. +-conductive wipe off when wire is inserted. Wire Gauges ADC’s LSA-PLUS contact supports a 20 to 26 AWG 24 AWG Supported +- wider range of wire gauges. Connectors This allows ADC to terminate .

• Quản trị mạng
• Krone
• cable
• ADC
• kỹ thuật
• công nghệ
• quản trị mạng
• kỹ thuật viễn thông
• KRONE AccessNET
• KRONE facts The Future of UTP
• Cat 5ET
• Cat6