TAILIEUCHUNG - Reactor performance, system reliability, instrumentation and control

The paper discusses scientific challenges faced in the beginning and achievements made throughout the projects, including the industrial impact and lessons learned. | Reactor performance system reliability instrumentation and control EPJ Nuclear Sci. Technol. 6 43 2020 Nuclear Sciences A. Schumm et al. published by EDP Sciences 2020 amp Technologies https epjn 2019017 Available online at https REVIEW ARTICLE Reactor performance system reliability instrumentation and control Andreas Schumm1 Madalina Rabung2 Gregory Marque1 and Jary Hamalainen3 1 EDF Labs Les Renardières EDF R amp D Avenue des Renardières 77818 Moret sur Loing France 2 Fraunhofer IZFP Campus 66123 Saarbrücken Germany 3 VTT Technical Research Centre of Finland Vuorimiehentie 3 Espoo Finland Received 12 March 2019 Accepted 4 June 2019 Abstract. We present a cross-cutting review of three on-going Horizon 2020 projects ADVISE NOMAD TEAM CABLES and one already finished FP7 project HARMONICS which address the reliability of safety- relevant components and systems in nuclear power plants with a scope ranging from the pressure vessel and primary loop to safety-critical software systems and electrical cables. The paper discusses scientific challenges faced in the beginning and achievements made throughout the projects including the industrial impact and lessons learned. Two particular aspects highlighted concern the way the projects sought contact with end users and the balance between industrial and academic partners. The paper concludes with an outlook on follow-up issues related to the long term operation of nuclear power plants. 1 Introduction HARMONICS 5 the only project of the four already terminated extends this approach to the software of The effective maintenance of nuclear power plants is computer-based I amp C safety systems. essential for their safe operation. Maintenance ensures that This review is intended to be voluntarily cross-cutting the level of reliability and effectiveness of all safety- focusing on achievements challenges and impacts of these relevant components and systems remains in accordance projects rather than

• Năng lượng
• Instrumentation and control
• Cross cutting review
• Three on going Horizon 2020 projects
• Safety critical software system
• Nuclear power plant
• Nuclear engineering and technology
• Effectiveness of fault tolerant techniques in a digital instrumentation
• Control system with a fault injection experiment
• Instrumentation and control systems
• Probabilistic safety assessment
• Method for the analysis of temporal change
• Physical structure in the instrumentation
• Control life cycle
• The I&C system design
• Basic instrumentation measuring devices
• Basic pid control
• Instrumentation equipment
• Kỹ thuật điện
• Kỹ thuật điện tử
• Tự động hóa
• Dalat Nuclear Research Reactor
• ASUZ 14R complexfor DNRR
• Control and protection system
• Manufacturer’s technical criteria
• Industrial instrumentation
• Process control
• Basic electrical components
• AC electricity
• Temperature and heat
• Application considerations
• Special issue on the International Symposium
• Future Instrumentation and Control for Nuclear Power Plants
• The Nuclear Engineering and Technolog
• An autonomous control framework for advanced reactors
• Autonomous control framework
• Nearly autonomous control system
• Instrumentation and Control System
• DC servo loop
• Low input capacitance
• Coupled chopper instrumentation amplifier
• Electrode offset
• Positive feedback loop
• BMC Musculoskeletal Disorders
• Congenital scoliosis
• Pulmonary complications
• Risk factors
• Posterior spinal instrumentation
• Electrical engineering
• Actuators and control
• Signal conditioning
• Signal transmission
• Understanding automotive electronics
• Automotive electronics
• Digital engine control system
• Vehicle motion control
• Automotive instrumentation
• Future automotive electronic systems
• Automation Using PLCs
• SCADA
• Process Control Fundamentals
• Data Acquisition Concepts
• Major System Components
• Telemetry Fundamentals
• applicability
• digesters
• evaporators
• paper machine
• paper pulp
• miscellaneous control
• Medical Terminology Systems
• A Body Systems Approach
• Body Systems Approach
• Ebook Medical Terminology Systems
• Năng lượng
• Cơ khí chế tạo máy
• Điện – điện tử
• Kiến trúc xây dựng
• office
• tin học
• Data Acquisition
• analogue signals
• Analogue measurements
• Interrupt vectors
• Interrupt priorities
• Parallel buses
• Mechatronics
• System Interfacing
• Instrumentation
• Microprocessor
• Modeling Electromechanical Systems
• Physical Basis
• Control Systems
• Technologies
• Averaging
• Conservation of mass
• Multiphase flow models
• Multiphase flow notation
• distribution functions
• Development of simulation based testing environment
• Safety critical software
• Simulation based testing environment
• The plant dynamics
• Digital Instrumentation and Control System
• Software Reliability Quantification
• Feedback Control
• Units of Measurement
• Plant Instruments
• Effects of Gravity
• Pneumatic Recorders
• Metallic Bellows