TAILIEUCHUNG - Docking process analysis in self repairing robots

The docking process is analyzed with the geometric method. Contact states in the docking process are explained in detail. At last, a simulation of six-module is shown that the modules can finish the docking process effectively. | Journal of Automation and Control Engineering Vol. 3, No. 3, June 2015 Docking Process Analysis in Self-repairing Robots Yanqiong Fei, Pengwei Gong, and Libo Song Research Institute of Robotics, Shanghai Jiaotong University Email: fyq@ Abstract—For the self-reconfigurable robot, one of its main functions is its self-repairing ability. First, the mechanical structure of the self-repairing robot is presented, which composes of a central cube and six rotary arms. In order to finish the self-repairing action, the disconnection/connection mechanism of each module is designed, which consists of one expansile hole (connection hole) and one extension peg (connection peg). Then, the docking process is analyzed with the geometric method. Contact states in the docking process are explained in detail. At last, a simulation of six-module is shown that the modules can finish the docking process effectively. modules to keep the completeness of the system configuration. This characteristic is unique compared with the fixed-architecture system. However, it’s common in biological systems. In this paper, the configuration of a homogeneous and lattice SMR is described. Its mechanical structure and disconnection/connection mechanism are designed. Based on different contact states, the docking process is analyzed with the geometric constraint method. Index Terms—self-reconfigurable process, module A. Structure of Module The self-reconfigurable robot “M-Cubes” is proposed (). In M-Cubes, the output of the DC motor is delivered to six transmission shafts (located in the centers of the cube) using five bevel gears. It uses the peg-in-hole principle to finish the docking process. In M-Cubes, each module in M-Cubes composes of a central cube and six rotary arms which are distributed on the six sides of the central cube. The size of the central cube is 23 cm. Each rotary arm can rotate 90° n about the axis of the cube (n=1, 2, 3, ). The rotary arm has a connection peg

• Cơ khí - Chế tạo máy
• Journal of Automation and Control Engineering
• Docking process analysis in self repairing robots
• Docking process analysis
• Self repairing robots
• The docking process effectively
• Simulation of six module
• Increasing the productivity of automation tool by developing socket
• Automation tool by developing socket
• Auto report generated
• The automation tool
• Abnormality management in industrial automation systems
• Industrial automation systems
• Future industrial automation systems
• Abnormality management approach
• Sliding mode based relative pose synchronous control
• Space autonomous rendezvous
• Relative pose synchronous control
• The control system design
• The sliding mode control law
• Application of pressure control type quasiservo valve
• Force control system
• The quasi servo valve
• The pneumatic cylinder
• Robust vehicle suspension system
• Converting active & passive control
• A vehicle to semi active control system analytically
• Semi Active Vehicle System
• Environmental control of a greenhouse system
• NI embedded systems technology
• The soil moisture
• The Engineering School of Bahrain Polytechnic
• Design of control system for 3D printer
• DSP and FPGA
• Control system for 3D printer
• Closed loop control
• Improving performances of a cement rotary kiln
• A model predictive control solution
• Cement rotary kiln
• Advanced process control
• Model predictive control
• Active learning in motor control and matlab simulation
• Active learning in motor control
• Servo motors of the simulation of neural networks
• Motion of a robot arm
• Redundancy and operation of power control system
• A deep space small probe
• Functions of redundancy
• Power Control Unit
• Closed loop speed control of miniature brushless DC motors
• Closed loop speed control
• Miniature brushless DC motors
• Delta Connected BLDC motors
• Adaptive wavelet backstepping control
• Class of mimo underactuated systems
• Multi input multi output
• Proposed control scheme
• Adaptive backstepping controller
• Hybrid position force control for a stewart platform
• Hybrid position force control
• The work surface
• The stewart platform
• Robust control of double inverted pendulum system
• Double inverted pendulum system
• Reference trajectory control
• The dynamic modeling
• Speech recognition in human computer interactive control
• Computer interactive control
• HTK and Sphinx
• Vietnamese speech recognition
• Human computer interaction
• Command shaped robust control of a flexible spacecraft
• Command shaped robust control
• Strong cross couplings
• Loop shaping design
• Optimal control of vehicle active suspension system
• Vehicle active suspension system
• The active suspension system
• LQR control technique
• Mimo fuzzy control for autonomous mobile robot
• Mimo fuzzy control
• Autonomous mobile robot
• Implementation of multi input multi output
• Reach defined target
• Asynthesis method of robust cascade control system
• Robust cascade control system
• Imposes robust conditions
• Soft oscillation index
• Efficient adaptive fuzzy control scheme for industrial manipulators
• Degree of freedom
• Fuzzy control scheme
• IMO nonlinear second order systems
• Multilevel inverter topology and control techniques
• Reduce electromagnetic interference
• Control strategies employed
• Linear quadratic optimal control problem of stochastic switching systems
• Linear quadratic optimal control problem
• Stochastic switching systems
• Non invariant linear systems
• Investigation of hybrid adaptive control schemes
• Needle free jet injection system
• Hybrid adaptive control schemes
• Needle free jet injection
• Modelling and simulations
• Development of a new algorithm
• Control excitation of particular mode of a building
• Particular mode of a building
• Sliding mode control
• Control of electric motor machine tools
• Self organizing fuzzy logic controller
• Modify the control rule
• The self organizing fuzzy logic controller