TAILIEUCHUNG - Photoluminescence quenching of nanocomposite materials used for organic solar cells

In this work, we have studied the photoluminescence (PL) quenching of two polymeric composites, poly[2- methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) and poly(3-hexylthiophene) (P3HT) in presence of nc-TiO2 particles by PL- spectroscopy. PL quenching values are and , for MEH-PPV+nc-TiO2 and P3HT+nc-TiO2, respectively. The obtained results on the relationship of PL quenching and photoelectrical efficiency (PCE) of an OSC showed that the quenching coefficient of a semiconducting polymer can be considered as apreliminary criterion for choosing an appropriate polymeric composite being used for OSC preparation. | Communications in Physics, Vol. 24, No. 3S1 (2014), pp. 22-28 DOI: PHOTOLUMINESCENCE QUENCHING OF NANOCOMPOSITE MATERIALS USED FOR ORGANIC SOLAR CELLS TRAN THI THAO, DO NGOC CHUNG, NGUYEN NANG DINH University of Engineering and Technology, Vietnam National University, Hanoi VO-VAN TRUONG Department of Physics, Concordia University, 1455 de Maisonneuve Blvd W., Montreal Quebec, Canada H3G 1M8 E-mail: dinhnn@ Received 04 June 2014 Accepted for publication 24 August 2014 Abstract. In this work, we have studied the photoluminescence (PL) quenching of two polymeric composites, poly[2methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) and poly(3-hexylthiophene) (P3HT) in presence of nc-TiO2 particles by PL- spectroscopy. PL quenching values are and , for MEH-PPV+nc-TiO2 and P3HT+nc-TiO2 , respectively. The obtained results on the relationship of PL quenching and photoelectrical efficiency (PCE) of an OSC showed that the quenching coefficient of a semiconducting polymer can be considered as apreliminary criterion for choosing an appropriate polymeric composite being used for OSC preparation. Under illumination of solar energyof 56 mW/cm2 , P3HT+TiO2 based OSC possess FF, VOC , JSC and PCE of , V, mA/cm2 and , respectively. Keywords: photoluminescence (PL) quenching, nc-TiO2 , MEH-PPV+nc-TiO2 , P3HT+nc-TiO2 , heterojunctions, organic solar cell (OSC). I. INTRODUCTION Recently, solar cells based on organic materials are increasingly interesting because of their possibility to reduce the fabrication cost [1-3]. Organic solar cells (OSCs) should have the following features: a strong light absorption over the whole solar spectrum; an appropriate energetic distance between the highest occupied molecular orbital (HOMO) and the lowest occupied molecular orbital (LUMO) of polymer to form a high open circuit voltage; a high and balanced electron and hole mobility in the polymer layer [4, 5]. When .

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.