TAILIEUCHUNG - FPGA Implementation of Mimo E-SDM for future communications wireless networks

The main contribution of this paper is to present our own design and implementation of 2x2 and 2x3 MIMO E-SDM systems on FPGA Altera Stratix DSP Development KIT using Verilog HDL, an important step before going to make integrated circuits. | TAÏP CHÍ PHAÙT TRIEÅN KH&CN, TAÄP 17, SOÁ K2- 2014 FPGA Implementation of Mimo E-SDM for future communications wireless networks • Nguyen Trung Hieu • Bui Huu Phu DCSELAB, University of Technology,VNU-HCM (Manuscript Received on December 11th, 2013; Manuscript Revised September 09th, 2014) ABSTRACT: Multiple-input multiple-output (MIMO) systems applying the Eigenbeam-Space Division Multiplexing (E-SDM) technique can be considered as optimal MIMO systems because of providing the highest channel capacity and good communications reliability. In the systems, orthogonal transmission beams are formed between transmit and receive sides; and also optimal transmit input data are adaptively allocated. In addition, a simple detection can be used at receiver to totally eliminate sub-stream interference. Therefore, MIMO E-SDM systems have been considered as a good potential technology for future high speed data transmission networks. Although there have been a lot of technical papers evaluated the systems based on theory analyses and/or computer-based simulation, just few ones have been considered the MIMO E-SDM systems based on hardware design. The main contribution of this paper is to present our own design and implementation of 2x2 and 2x3 MIMO E-SDM systems on FPGA Altera Stratix DSP Development KIT using Verilog HDL, an important step before going to make integrated circuits. The biterror rate performance the consumption for our design of these systems have shown that our design is successful. Keywords: MIMO, E-SDM, ZF, FPGA, hardware design. 1. INTRODUCTION Multiple-input multiple-out (MIMO) systems , 3GPP Long Term Evolution, and WiMAX have been considered as a high speed data When channel state information (CSI) is not [1–3]. transmission technology. The channel capacity of available the systems can increase significantly and is multiplexing (SDM) technique is used for data proportionally to the number of transmit (TX) and transmission. In the .

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.