TAILIEUCHUNG - Ebook Centrifugal pumps: Part 2

(BQ) Part 2 book "Centrifugal pumps" has contents: Numerical flow calculations, hydraulic forces, noise and vibrations, operation of centrifugal pump, turbine operation, general characteristics,.and other contents. | 8 Numerical flow calculations Real flows are described by partial differential equations which cannot be solved analytically in the general case. By dividing a complex flow domain into a multitude of small cells, these equations can be solved in an approximate manner by numerical methods. Because of their wide range of application, numerical flow calculations (“computational fluid dynamics” or “CFD” for short) have become a special discipline of fluid dynamics. The information given in this chapter is intended to help the understanding and interpretation of numerical flow calculations of centrifugal pumps. The focus is on viscous methods since these provide the best chance of describing realistically the boundary layers and secondary flows in decelerated flow on curved paths as encountered in radial and semi-axial pumps. This statement is not meant to preclude that simpler methods may be applied meaningfully to make a first design. The following discussion of CFD methods and possibilities focuses also on limits and uncertainties of CFD modeling as well as on quality criteria and issues in CFD applications, Chaps. , , and . Overview Because of the complex flow phenomena in centrifugal pumps, the design of impellers, diffusers, volutes and inlet casings is frequently based on empirical data for determining the flow deflection in the impeller and estimating performance and losses. The design of flow channels and blades then relies on experience and coefficients which originate from test data, Chaps. 3 and 7. The availability of relatively inexpensive computers with high computing powers has fostered the development of numerical methods which are able to solve the 3-dimensional Navier-Stokes-equations in complex components with reasonable effort. Therefore, numerical methods are used also in the pump industry with the object of optimizing the hydraulic components, to increase the reliability of performance prediction and thus to reduce testing .

• Cơ khí - Chế tạo máy
• Centrifugal pumps
• Numerical flow calculations
• Hydraulic forces
• Noise and vibrations
• Turbine operation
• General characteristics
• Centrifugal pumps design
• Centrifugal pumps operation
• Centrifugal pumps maintenance
• practical centrifugal pumps
• Centrifugal pumps Centrifugal pumps operation
• Pump hydraulics
• Pump specification
• Advantages and components
• Cost economics of both polymer
• Metal centrifugal pumps
• Engineering plastic materials
• Shaft degin
• Axial thrust
• Mechanical seals
• Noise in pumps
• Rolling element bearings
• Mechanical seal reliability
• Design and application
• Specific speed
• Modeling laws
• Impeller design
• General pump design
• Volute design
• Side suction design
• Fluid dynamic principles
• Performance data
• Pump hydraulics and physical concepts
• Performance characteristics
• Partload operation
• The medium on performance
• Pump selection
• Quality considerations
• Pump types
• Suction capability
• Duction capability
• Analysis of Cavitation
• Fault Diagnosis
• Motor Electrical Signals
• CAD Techniques
• Fluid Flow Control
• Increase Energy
• pumps
• Atmospheric pressure
• Affinity Laws
• Pump Classification
• Pump Curves
• Shaft Deflection
• Electrical Signals
• speceflic speed
• ganeral pump
• vertical pumps
• high speed
• Technologies
• Systems Engineering
• robotic
• mechanical
• anatomy
• cơ khí chế tạo máy
• tài liệu cơ khí
• sổ tay cơ khí
• đề thi cơ khí
• luyện thi cơ khí