TAILIEUCHUNG - Ebook Practical centrifugal pumps - Design operation and maintenance: Part 1

(BQ) Part 1 book "Practical centrifugal pumps - Design operation and maintenance" has contents: Introduction, centrifugal pump design and construction, pump hydraulics, forces in centrifugal pumps, centrifugal pump operation and characteristics. | Practical Centrifugal Pumps Design, Operation and Maintenance Other titles in the series Practical Cleanrooms: Technologies and Facilities (David Conway) Practical Data Acquisition for Instrumentation and Control Systems (John Park, Steve Mackay) Practical Data Communications for Instrumentation and Control (Steve Mackay, Edwin Wright, John Park) Practical Digital Signal Processing for Engineers and Technicians (Edmund Lai) Practical Electrical Network Automation and Communication Systems (Cobus Strauss) Practical Embedded Controllers (John Park) Practical Fiber Optics (David Bailey, Edwin Wright) Practical Industrial Data Networks: Design, Installation and Troubleshooting (Steve Mackay, Edwin Wright, John Park, Deon Reynders) Practical Industrial Safety, Risk Assessment and Shutdown Systems for Instrumentation and Control (Dave Macdonald) Practical Modern SCADA Protocols: DNP3, and Related Systems (Gordon Clarke, Deon Reynders) Practical Radio Engineering and Telemetry for Industry (David Bailey) Practical SCADA for Industry (David Bailey, Edwin Wright) Practical TCP/IP and Ethernet Networking (Deon Reynders, Edwin Wright) Practical Variable Speed Drives and Power Electronics (Malcolm Barnes) Practical Electrical Equipment and Installations in Hazardous Areas (Geoffrey Bottrill and G. Vijayaraghavan) Practical E-Manufacturing and Supply Chain Management (Gerhard Greef and Ranjan Ghoshal) Practical Grounding, Bonding, Shielding and Surge Protection (G. Vijayaraghavan, Mark Brown and Malcolm Barnes) Practical Hazops, Trips and Alarms (David Macdonald) Practical Industrial Data Communications: Best Practice Techniques (Deon Reynders, Steve Mackay and Edwin Wright) Practical Machinery Safety (David Macdonald) Practical Machinery Vibration Analysis and Predictive Maintenance (Cornelius Scheffer and Paresh Girdhar) Practical Power Distribution for Industry (Jan de Kock and Cobus Strauss) Practical Process Control for Engineers and Technicians (Wolfgang .

• Cơ khí - Chế tạo máy
• Centrifugal pumps design
• Centrifugal pumps operation
• Centrifugal pumps maintenance
• practical centrifugal pumps
• Centrifugal pumps Centrifugal pumps operation
• Pump hydraulics
• Pump specification
• Centrifugal pumps
• Design and application
• Specific speed
• Modeling laws
• Impeller design
• General pump design
• Volute design
• Side suction design
• Shaft degin
• Axial thrust
• Mechanical seals
• Noise in pumps
• Rolling element bearings
• Mechanical seal reliability
• speceflic speed
• ganeral pump
• vertical pumps
• high speed
• Fault Diagnosis
• Electrical Signals
• CAD Techniques
• Fluid Flow Control
• Turbomachinery design and theory
• Turbomachinery design
• Dimensional analysis—basic thermodynamics
• Fluid mechanics
• Hydraulic pumps
• Hydraulic turbines
• Centrifugal compressors
• Applied multivariate statistical analysis
• Hydraulics Workbook basic level
• Automatic lathe pump characteristic
• Drawing press hydraulic resistances
• Cold store door accumulator
• Control valve characteristic
• Fluid dynamic principles
• Performance data
• Pump hydraulics and physical concepts
• Performance characteristics
• Partload operation
• Numerical flow calculations
• A working guide to process equipment
• Draw off nozzle hydraulics
• Basic terms and condition
• Control tower pressure
• Drives distillation towers
• Air lift pump