TAILIEUCHUNG - DSP applications using C and the TMS320C6X DSK (P7)

Adaptive Filters • • • Adaptive structures The least mean squares (LMS) algorithm Programming examples for noise cancellation and system identification using C code Adaptive filters are best used in cases where signal conditions or system parameters are slowly changing and the filter is to be adjusted to compensate for this change. The least mean squares (LMS) criterion is a search algorithm that can be used to provide the strategy for adjusting the filter coefficients. Programming examples are included to give a basic intuitive understanding of adaptive filters. INTRODUCTION In conventional FIR and IIR digital filters, it is assumed that the process parameters. | DSP Applications Using C and the TMS320C6x DSK. Rulph Chassaing Copyright 2002 John Wiley Sons Inc. ISBNs 0-471-20754-3 Hardback 0-471-22112-0 Electronic L_ Adaptive Filters Adaptive structures The least mean squares LMS algorithm Programming examples for noise cancellation and system identification using C code Adaptive filters are best used in cases where signal conditions or system parameters are slowly changing and the filter is to be adjusted to compensate for this change. The least mean squares LMS criterion is a search algorithm that can be used to provide the strategy for adjusting the filter coefficients. Programming examples are included to give a basic intuitive understanding of adaptive filters. INTRODUCTION In conventional FIR and IIR digital filters it is assumed that the process parameters to determine the filter characteristics are known. They may vary with time but the nature of the variation is assumed to be known. In many practical problems there may be a large uncertainty in some parameters because of inadequate prior test data about the process. Some parameters might be expected to change with time but the exact nature of the change is not predictable. In such cases it is highly desirable to design the filter to be self-learning so that it can adapt itself to the situation at hand. The coefficients of an adaptive filter are adjusted to compensate for changes in input signal output signal or system parameters. Instead of being rigid an adaptive system can learn the signal characteristics and track slow changes. An adaptive filter can be very useful when there is uncertainty about the characteristics of a signal or when these characteristics change. 216 Introduction 217 d Adaptive filter FIGURE . Basic adaptive filter structure. Figure shows a basic adaptive filter structure in which the adaptive filter s output y is compared with a desired signal d to yield an error signal e which is fed back to the adaptive filter. The coefficients .

TÀI LIỆU LIÊN QUAN
31    426    56
TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.