TAILIEUCHUNG - MECHANICAL POWER PRESS SAFETY

To prepare the samples of different horizontal layers of bamboo, bottom portion of three year old bamboo was used. The epidermis of the strips was first removed with a fine blade. The epidermis was kept for chemical analysis and the rest of the strips were divided evenly based on volume into inner, middle and outer layers along the radial direction by a fine blade. The grinding process was the same as above described. All tests were conducted under the standards of American Society for Testing and Materials (ASTM) except for alcohol-toluene solubility of bamboo. There was. | MECHANICAL POWER PRESS SAFETY Prepared By Kentucky Labor Cabinet Division of Education and Training 1047 . 127 South Suite 4 Frankfort KY 40601 This booklet has been prepared to aid employers and employees in their efforts to comply with the rules and regulations of Kentucky s Occupational Safety and Health Program as they pertain to mechanical power presses. If this manual meets the needs of your establishment it may be used as written. If you have previously established and are maintaining a safety program you can continue to use your program provided that the essential elements covered in this booklet are also addressed in your program. Use of all or part of this manual does not relieve employers of their responsibility to comply with other applicable local state or federal laws. It is intended that this manual be enhanced and continuously improved by the employer. Any section of this manual may be modified by the employer to accommodate actual operations and work practices provided that the original intent of that section is not lost. If there is a safety rule policy or procedure appropriate for the work or work environment which has not been included or if a rule included in this manual is inappropriately written then a new safety rule policy or procedure should be added to improve the manual. The standards referenced throughout the booklet are from Kentucky s Occupational Safety and Health Standards for General Industry as adopted from 29 Code of Federal Regulations CFR Part 1910 under the authority of 803 Kentucky Administrative Regulations KAR 2 020. It is imperative that the user of this booklet have a current copy of the Kentucky Occupational Safety and Health Standards for General Industry. Many references will be made to specific sections of the General Industry Standards throughout this booklet. Parenthetical statements can be found throughout this booklet to provide insight and clarification only. This material has been developed by the Kentucky .

• Cơ khí - Chế tạo máy
• Photodecomposition
• Behaviors of Pesticides
• Water Supply
• Alumina Carrier
• Titanium Dioxide
• Dioxide Photocatalyst
• báo cáo khoa học
• báo cáo hóa học
• công trình nghiên cứu về hóa học
• tài liệu về hóa học
• cách trình bày báo cáo