TAILIEUCHUNG - COASTAL AQUIFER MANAGEMENT: monitoring, modeling, and case studies - Chapter 3

Công cụ cho Mô phỏng các dòng nước ngầm Variable-Mật độ MODFLOW-Based Hầu hết các nhà khoa học và kỹ sư tham khảo MODFLOW [McDonald và Harbaugh, 1988; Harbaugh và McDonald, năm 1996; Harbaugh et al, 2000.] Và các chương trình máy tính được sử dụng rộng rãi nhất cho các vấn đề mật độ không đổi dòng chảy ngầm. Sự thành công của MODFLOW phần lớn là do tài liệu hướng dẫn kỹ lưỡng của nó, cấu trúc mô-đun, mà làm cho chương trình dễ dàng để sửa đổi và nâng cao, và sự có sẵn công cộng của các. | CHAPTER 3 MODFLOW-Based Tools for Simulation of Variable-Density Groundwater Flow . Langevin . Oude Essink S. Panday M. Bakker H. Prommer . Swain W. Jones M. Beach M. Barcelo 1. INTRODUCTION Most scientists and engineers refer to MODFLOW McDonald and Harbaugh 1988 Harbaugh and McDonald 1996 Harbaugh et al. 2000 as the computer program most widely used for constant-density groundwater flow problems. The success of MODFLOW is largely attributed to its thorough documentation modular structure which makes the program easy to modify and enhance and the public availability of the software and source code. MODFLOW has been referred to as a community model because of the large number of packages and utilities developed for the program Hill et al. 2003 . In recent years the MODFLOW code has been adapted to simulate variable-density groundwater flow. Because MODFLOW is so widely used these variable-density versions of the code are rapidly gaining acceptance by the modeling community. To represent variable-density flow in MODFLOW the flow equation is formulated in terms of equivalent freshwater head. With this approach the finite-difference representation is rewritten so that fluid density is isolated into mathematical terms that are identical in form to source and sink terms. These pseudo-sources can then be easily incorporated into the matrix equations solved by MODFLOW. Weiss 1982 was one of the first to recast the groundwater flow equation in terms of equivalent freshwater head and introduce the concept of a pseudo-source. Lebbe 1983 used a similar approach to develop a variable-density version of the MOC code Konikow and Bredehoeft 1978 . Maas and Emke 1988 were among the first to incorporate variable-density flow into MODFLOW. The approach was improved by Olsthoorn 1996 to account for inclined model layers. These initial studies allowed for fluid density to vary in space but not in time. Recently solute transport codes have been linked directly with MODFLOW .

TỪ KHÓA LIÊN QUAN
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.