TAILIEUCHUNG - tài liệu hướng dẫn sử dụng biến tần danfoss phần 4

Chức năng: Thông số 007 bản sao LCP được sử dụng nếu LCP 2 bảng điều khiển là được sử dụng để chuyển giao các thiết lập. Sử dụng chức năng này nếu tất cả các thiết lập tham số 1-4 để được sao chép từ một đơn vị khác bằng cách kết nối bảng điều khiển kiểm soát LCP 2 đến ổ đĩa khác nhau. | VLT 2800 Series Function Parameter 007 LCP copy is used if the LCP 2 control panel is to be used to transfer settings. Use this function if all parameter Setups 1-4 are to be copied from one unit to another by connecting the LCP 2 control panel to different drives. Description of choice Select Upload all parameters 1 to transfer all parameter values to the LCP Select Download all parameters 2 to transfer parameter values to the unit on which the control panel has been connected. Select Download power-independent parameters 3 if only the power-independent parameters are to be downloaded. Use this facility when downloading to a unit with a different rated power size than the unit from which the parameter Setup originates. Ml NOTE Upload download can only be performed in stop mode. Download can only be performed to an adjustable frequency drive with the same software version number see parameter 626 Database identification no. 008 Display scaling of output frequency FREQUENCY SCALE Value - Function In this parameter the factor is selected by which the output frequency is to be multiplied. The value is shown in the display provided parameters 009-012 Display readout have been set to Output frequencyx scaling 5 . Description of choice Set the required scaling factor. 009 Large display readout DISPLAY LINE 2 Value No readout NONE 0 Resulting reference REFERENCE 1 Resulting reference unit REFERENCE UNIT 2 Feedback unit FEeDbACK UNIT 3 Frequency Hz FREQUENCY HZ 4 Output frequency x scaling FREQUENCY X SCAL. 5 Motor current A MOTOR CURRENT A 6 Torque TORQUE 7 Power kW POWER KW 8 Power HP POWER HP 9 Motor voltage V MOTOR VOLTAGE V 11 DC link voltage V DC LINK VOLTAGE V 12 Thermal load motor THERM. LOAD MOTOR 13 Thermal load THERM. LOAD 14 Running hours Hours RUN HOURS HOURS 15 Digital input Bin DIGITAL INPUT BIN 16 Analog input 53 V . 53 V 17 Analog input 60 mA ANA. INP. 60 MA 19 Pulse reference Hz PULSE REFERENCE HZ 20 External reference EXT. .

TỪ KHÓA LIÊN QUAN
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.