TAILIEUCHUNG - Cisco Systems - Managing IP tracffic with access lists

Upon completing this module, you will be able to: Use Cisco IOS commands to configure standard and extended IP access lists, and NAT/PAT, given a functioning router Use show commands to identify anomalies in standard and extended IP access lists, given an operational router | © 2002, Cisco Systems, Inc. All rights reserved. Managing IP Traffic with Access Lists Module 6 Purpose: This chapter introduces the Cisco IOS™ CLI on the Catalyst® 1900 switch and router. Timing: This chapter should take about 2 hours to present. Note: The Catalyst 1900 switch only has a subset of the router Cisco IOS commands available. Contents: Introduction to Cisco IOS. Explain to the student what is IOS? Cisco Device startup procedures in general. IOS configuration source. General introduction to the IOS CLI. Cat 1900 switch startup procedures. Intro to Cat 1900 CLI. This part covers the basic configuration on the switch, like setting the IP address and hostname. More details about the various Cat 1900 switch configuration commands are explained in Chapter 6 and 7. Router startup procedures. More details on the router startup process is discussed in chapter 5. Router IOS CLI. Objectives Upon completing this module, you will be able to: Use Cisco IOS commands to configure .

• Quản trị mạng
• Cisco Systems
• Network Devices
• computer
• businesses
• technology operational
• Cisco IOS
• Managing IP tracffic
• Managing Cisco IOS devices
• Cisco router
• Cấu hình cisco router
• Chức năng cisco router
• Tài liệu IT
• cisco systems – inc
• Tập đoàn hệ thống Cisco
• khách hàng và đối tác
• sản phẩm và dịch vụ
• quy trình đặ hàng
• xử lý đơn hàng
• cisco exam
• cisco CSIDS
• Switching
• management network
• Cisco Switches
• PIX Firewall
• information technology
• international certification
• network cisco
• network Systems
• Cisco TelePresence System
• Linux system
• Starting a switch
• Starting a Router
• Configuring a Router
• network environment
• remove devices
• Router startup
• switch operations
• Redundant topology overview
• tree protocol overview
• Configuring a catalyst switch