TAILIEUCHUNG - Model-Based Design for Embedded Systems- P7

Model-Based Design for Embedded Systems- P7:The unparalleled flexibility of computation has been a key driver and feature bonanza in the development of a wide range of products across a broad and diverse spectrum of applications such as in the automotive aerospace, health care, consumer electronics, etc. | 156 Model-Based Design for Embedded Systems the sending and the receiving node and a is an environment parameter typically in the range from 2 to 4 . If the received energy is below a user-defined threshold then no reception will take place. A node that wants to transmit a message will proceed as follows The node first checks whether the medium is idle. If that has been the case for 50 gs then the transmission may proceed. If not the node will wait for a random back-off time before the next attempt. The signal-to-interference ratio in the receiving node is calculated by treating all simultaneous transmissions as an additive noise. This information is used to determine a probabilistic measure of the number of bit errors in the received message. If the number of errors is below a configurable bit-error threshold then the packet could be successfully received. Example Constant Bandwidth Server The constant bandwidth server CBS 1 is a scheduling server for aperiodic and soft tasks that executes on top of an EDF scheduler. A CBS is characterized by two parameters a server period Ts and a utilization factor Us. The server ensures that the task s executing within the server can never occupy more than the Us of the total CPU bandwidth. Associated with the server are two dynamic attributes the server budget cs and the server deadline ds. Jobs that arrive at the server are placed in a queue and are served on a first-come first-serve basis. The first job in the queue is always eligible for execution using the current server deadline ds. The server is initialized with cs UsTs and ds Ts. The rules for updating the server are as follows 1. During the execution of a job the budget cs is decreased at unit rate. 2. Whenever cs 0 the budget is recharged to cs UsTs and the deadline is postponed one server period ds ds Ts. 3. If a job arrives at an empty server at time r and cs ds - r Us then the budget is recharged to cs UsTs and the deadline is set to ds r Ts. The first and .

• Quản trị mạng
• Hành trình mạng không dây
• mạng WiFi
• khắc phục sự cố mạng
• chia subnet
• giáo trình mạng máy tính
• Nhiễu kỹ thuật
• kết nối mạng không dây
• mạng không dây
• Các kỹ thuật kết nối mạng không dây
• công nghệ thông tin
• hệ điều hành
• kỹ thuật lập trình
• quản trị mạng
• WiFi
• WiMax
• Lập trình web Internet
• mạng máy tính
• tài liệu mạng máy tính
• chuyên ngành mạng máy tính
• câu hỏi về mạng máy tính
• giáo trình mạng cisco