TAILIEUCHUNG - CCNP Routing Study Guide- P4

CCNP Routing Study Guide- P4:T his book is intended to help you continue on your exciting new path toward obtaining your CCNP and CCIE certification. Before reading this book, it is important to have at least read the Sybex CCNA: Cisco Certified Network Associate Study Guide, Second Edition. You can take the CCNP tests in any order, but you should have passed the CCNA exam before pursuing your CCNP. | Written Lab 53 Written Lab In this lab write in the routing protocol that is described. The possibilities are RIP RIPv2 IGRP EIGRP IS-IS and OSPF. More than one answer may be possible per characteristic. Protocol Characteristic Maximum of 15 hops by default Administrative distance of 120 Administrative distance of 100 Administrative distance of 90 Administrative distance of 110 Uses composite metric to determine the best path to a remote network Uses only hop count to determine the best path to a remote network VLSM support Non-proprietary Floods network with LSAs to prevent loops Must have hierarchical network design Uses only bandwidth as a metric Uses more than one table to assist in rapid convergence Route update contains only needed information Automatic route summarization at major network boundaries Copyright 2001 SYBEX Inc. Alameda CA 54 Chapter 2 Routing Principles Review Questions 1. What are two benefits of using a link-state routing protocol A. It uses the Hello protocol to establish adjacencies. B. It uses several components to calculate the metric of a route. C. Updates are sent only when changes occur in the network. D. It is a better protocol than the distance-vector protocol. 2. Which protocols do not use a topology table A. EIGRP B. IGRP C. RIPv1 D. OSPF 3. RIPv2 provides which of the following benefits over RIPv1 A. RIPv2 is link-state. B. RIPv2 uses a topology table. C. RIPv2 supports VLSM. D. RIPv2 uses Hello messages. 4. What is the administrative distance of directly connected routes A. 0 B. 1 C. 90 D. 100 E. 110 Copyright 2001 SYBEX Inc. Alameda CA Review Questions 55 5. Which of the following are considered distance-vector Choose all that apply. A. RIP B. RIPv2 C. IGRP D. EIGRP E. OSPF F. IS-IS 6. What is the default administrative distance of OSPF A. 0 B. 1 C. 90 D. 100 E. 110 7. Which is true regarding classless routing A. It sends periodic subnet mask information. B. It sends incremental subnet mask .

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.