TAILIEUCHUNG - Synthesis Place-and-Route (SP&R) Flow Guide

This document describes the Cadence® synthesis place-and-route (SP&R) flow. The SP&R flow integrates the Cadence physically knowledgeable synthesis (PKS) tool with the Silicon Ensemble™ place-and-route (SE) tool to take your complex deep sub-micron digital IC designs all the way from RTL to GDSII. | Synthesis Place-and-Route SP R Flow Guide Product Version May 2001 2001 Cadence Design Systems Inc. All rights reserved. Printed in the United States of America. Cadence Design Systems Inc. 555 River Oaks Parkway San Jose CA 95134 USA Trademarks Trademarks and service marks of Cadence Design Systems Inc. Cadence contained in this document are attributed to Cadence with the appropriate symbol. For queries regarding Cadence s trademarks contact the corporate legal department at the address shown above or call 1-800-862-4522. All other trademarks are the property of their respective holders. Restricted Print Permission This publication is protected by copyright and any unauthorized use of this publication may violate copyright trademark and other laws. Except as specified in this permission statement this publication may not be copied reproduced modified published uploaded posted transmitted or distributed in any way without prior written permission from Cadence. This statement grants you permission to print one 1 hard copy of this publication subject to the following conditions 1. The publication may be used solely for personal informational and noncommercial purposes 2. The publication may not be modified in any way 3. Any copy of the publication or portion thereof must include all original copyright trademark and other proprietary notices and this permission statement and 4. Cadence reserves the right to revoke this authorization at any time and any such use shall be discontinued immediately upon written notice from Cadence. Disclaimer Information in this publication is subject to change without notice and does not represent a commitment on the part of Cadence. The information contained herein is the proprietary and confidential information of Cadence or its licensors and is supplied subject to and may be used only by Cadence s customer in accordance with a written agreement between Cadence and its customer. Except as may be explicitly set forth in such .

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.