TAILIEUCHUNG - Compressible flow friction

•In pipelines of gasses flow functional reliance l = f(De,Re) is means ,that friction depend from the equivalent roughness and flow regime. | COMPRESSIBLE FLOW FRICTION Friction in gas pipelines Coefficient In pipelines of gasses flow functional reliance l = f(De,Re) is means ,that friction depend from the equivalent roughness and flow regime. For steel material of gas pipes equivalent roughness De = 0,1 mm . For copper or plastic gas pipes De = 0,0015–0,003 mm only.(see Table) According the Moody chart,5 zones of friction factor is valid: 1) Laminar laminar flow friction factor is independent of relative roughness,and can be estimated by formula: (1) Where : Re 4000 ,and Re 4000, and 10 4000, and Re e/d >500) surface roughness completely dominates the character of the flow near the wall.( = f ( e/d))From the (5) formula we can find in that case: (6) Equivalent Roughness efor New Pipes Pipe Equivalent Roughness, in mm Riveted steel – Concrete – Wood stave – Cast iron Galvanized iron Commercial steel or wrought iron Drawn tubing Plastic, glass (hydraulically smooth) NOTE: Even for hydraulically smooth pipes the friction factor is not is,there is a head loss in any pipe,no matter how smooth the surface is is a result

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.