TAILIEUCHUNG - Research and build a soft microprocessor and ethernet interface using edk of xilinx

This soft microprocessor is made from the EDK software tool's XPS (Xilinx), configured into the Xilinx XC3S500E FPGA on the Xilinx Spartan XC3S500 E board. The software operating the interface between the microprocessor and the Ethernet interface port written in C language and functioned as a HOST (station) has its own IP to connect to the Ethernet network. To perform data transmission, it requires an Ethernet cable supporting up to 100Mbs and the computer program that runs the data collection and communication with a soft microprocessor written in Labview. |

TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.