TAILIEUCHUNG - Summary of science materials doctoral thesis: Fabrication and investigation of characteristics of photonic microcavity 1D for optical sensors

The objectives of the thesis: Research and fabricate the one-dimensional (1D) – nanoporous silicon microcavity (1D-NPSMC) structures by using electrochemical etching method with the selectivity of wavelength in visible range from 200 nm to 800 nm. The 1D-NPSMC structures has high reflectivity, narrow linewidth of the pass-band and homogeneous pores ii) Design the photonic sensor device based on 1D-NPSMC structure which is capable of measuring in two modes: liquid phase (used for determination pesticides) and vapor phase (used for determination organic solvents) iii) Determinate the low concentrations of pesticides and organic solvents in aqueous medium. | Summary of science materials doctoral thesis: Fabrication and investigation of characteristics of photonic microcavity 1D for optical sensors

TÀI LIỆU LIÊN QUAN
TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.