TAILIEUCHUNG - Recycling of industrial waste phosphogypsum for producing no cement mortar

The present study aims to investigate the possibility of recycling phosphogypsum (PG), which is a by-product of the fertilizer industry, for producing no-cement mortar (NCM). The PG powder was mixed with ground granulated blast furnace slag (GGBFS), carbide slag (CS), calcium hydroxide (CH) at different compositions to prepare the NCM samples for the investigation. | 32 Huynh Trong Phuoc, Do Ngoc Duy, Bui Le Anh Tuan RECYCLING OF INDUSTRIAL WASTE PHOSPHOGYPSUM FOR PRODUCING NO-CEMENT MORTAR TÁI CHẾ PHẾ THẢI CÔNG NGHIỆP PHOSPHOGYPSUM TRONG SẢN XUẤT VỮA KHÔNG XI MĂNG Huynh Trong Phuoc, Do Ngoc Duy, Bui Le Anh Tuan Can Tho University; htphuoc@, blatuan@ Abstract - The present study aims to investigate the possibility of recycling phosphogypsum (PG), which is a by-product of the fertilizer industry, for producing no-cement mortar (NCM). The PG powder was mixed with ground granulated blast furnace slag (GGBFS), carbide slag (CS), calcium hydroxide (CH) at different compositions to prepare the NCM samples for the investigation. A systematical evaluation about characteristics of the NCM was reported at both fresh and hardened stages, including flowability, setting time, unit weight, and compressive strength. Additionally, microstructural properties of the NCMsamples were examined using advanced analysis techniques of a scanning electron microscope (SEM) and X-ray diffraction (XRD). Furthermore, a cost analysis was also performed to show the capability of the real application. The test results show great potential for utilizing the above materials for the production of NCM with properties that meet the requirements for real practice. Tóm tắt - Nghiên cứu này nhằm tìm hiểu khả năng tái chế phosphogypsum (PG), một phế phẩm của ngành công nghiệp phân bón, trong sản xuất vữakhông xi măng (NCM). Bột PG được trộn với xỉ lò cao nghiền mịn (GGBFS) và xỉ các bua (CS) hoặc canxi hyđrôxít (CH) với các hàm lượng khác nhau để chuẩn bị mẫu NCM dùng cho nghiên cứu. Một hệ thống đánh giá đặc tính của NCM đã được báo cáo ở cả giai đoạn tươi và đóng rắn, bao gồm: độ chảy, thời gian ninh kết, khối lượng thể tích và cường độ chịu nén. Ngoài ra, các tính chất vi cấu trúc của các mẫuNCM đã được kiểm tra bằng các kỹ thuật phân tích tiên tiến của kính hiển vi quét điện tử (SEM) và nhiễu xạ tia X (XRD). Hơn nữa, phân tích chi phí .

Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.