TAILIEUCHUNG - A non-linear element for analysing elastic frame structures at large deflections

A non-linear finite element for analysing elastic frame structures at large deflections is presented. A co-rotational technique combined with Classical beam theory with the inclusion of the effect of axial forces is adopted. The element nodal force vector is derived from the strain energy of the element. | Vietnam Journal of Mechanics, NCST of Vietnam Vol. 22, 2000, No 1 (19 - 28) A NON-LINEAR ELEMENT FOR ANALYSING ELASTIC FRAME STRUCTURES AT LARGE DEFLECTIONS NGUYEN DINH KIEN Institute of Mechanics, 264 Doi Can, Hanoi '. ABSTRACT. A non-linear finite element for analysing elastic frame structures at large deflections is presented. A co-rotational technique combined with Classical beam theory with the inclusion of the effect of axial forces is adopted. The element nodal force vector is derived from the strain energy of the element. The element tangent stiffness matrix is obtained by differentiating the nodal force vector , with respect to the degree of freedom (.). The obtained formulations have a simple and compact mathematical forms which are easy to implement into a computer program. An incremental interactive technique based on Newton-Raphson method is adopted to solve the non-linear equation and to trace the equilibrium paths of the structures. Numerical examples are presented to show the accuracy and efficiency of the proposed formulations. 1. Introduction The use of finite element method in engineering practice is increasing rapidly. This trend is observed because the integrated use of finite element softwares in CAD can have a significant benefit on-the productivity of a design team, increase the funct ionality of the design and decrease its cost [1]. Lately, the finite element method has proven to be very effective in linear analysis [2], and the solutions have also been obtained for some non-linear prob• lems [3]. However, much research is now underway to solve the problems of the continuum mechanics and to improve the finite element formulations as well as numerical integration procedures and computer program implementation. In the field of structural mechanics, the analyses of beam and frame structures are of great importance. With the fast development of computational technology, and the importance of the beam and frame structures in practical

• Cơ khí - Chế tạo máy
• Vietnam Journal of Mechanics
• A non linear element
• Analysing elastic frame structures at large deflections
• Classical beam theory
• Co rotational technique
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure