TAILIEUCHUNG - CCNA1 SKILL BASED EXAMINATION - Number 1

Configuration requirements: (8 marks) 1. Calculating the subnet addressing for the lab using the VLSM technique and note all information needed on the topology. 2. In each LAN, configure the second usable host address for PC1 and the last usable host address for PC2. 3. Perform Basic Router Configurations all Routers. 4. Enable routing on R1, R2, R3 and R4 by using the static routing protocol. | Full name: Class: _ CCNA1 SKILL BASED EXAMINATION Duration: 70 minutes No documents allowed Configuration requirements: (8 marks) 1. Calculating the subnet addressing for the lab using the VLSM technique and note all information needed on the topology. 2. In each LAN, configure the second usable host address for PC1 and the last usable host address for PC2. 3. Perform Basic Router Configurations all Routers. 4. Enable routing on R1, R2, R3 and R4 by using the static routing protocol. Challenge questions: (2 marks) 1. How many bits need to be borrowed if the Classfull subneting technique is used ? Subnet 1: __ Subnet 2: __ Subnet 3: __ 2. How many addresses for hosts will the network provide? A. 510 B. 512 C. 1022 C. 1024 D. 2046 E. 2048 1

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.