TAILIEUCHUNG - Apress - Smart Home Automation with Linux (2010)- P11

Apress - Smart Home Automation with Linux (2010)- P11:Linux users can now control their homes remotely! Are you a Linux user who has ever wanted to turn on the lights in your house, or open and close the curtains, while away on holiday? Want to be able to play the same music in every room, controlled from your laptop or mobile phone? Do you want to do these things without an expensive off-the-shelf kit | CHAPTER 1 APPLIANCE CONTROL For a machine to have an address it must be given one either by a human or by a suitably configured computer. It cannot randomly generate one in case the address conflicts with another machine on the network or is one of the reserved addresses such as . All the networked machines in the home should exist within a specific range of addresses known as a subnet and should be assigned to one of the private address ranges provided by the IPv4 specification. This not only stops conflicts with other existing sites on the Internet but also ensures the data within these networks is secure and invisible to machines outside the network because all routers switches and gateways do not recommunicate any traffic with a private address range outside the local network. These private address ranges are 8 and where x can mean any value between 0 and 255. For the purposes of demonstration I will assign my subnet to the range giving me 2549 possible devices on the network. Most people use this for private networks because nearly all the routers sold for the home allocate addresses within this range. Also most questions found on the various Internet forums will probably have answers detailed using the same addresses as you have. Now knowing the address range of your network you have to consider the individual addresses. The first one to assign is the router which usually earns the designation 10 followed by the Linux server which I will assign . Caution Configuring properties such as IP addresses requires you to be logged in as root so tread carefully You can provide a Linux machine a static address either by using the tools in your desktop GUI or by configuring the etc network interfaces file directly auto eth1 iface eth1 inet static address netmask broadcast network This tells the system to use the network card assigned as eth111

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.