TAILIEUCHUNG - Báo cáo lâm nghiệp: "Modeling lumber recovery in relation to selected tree characteristics in jack pine using sawing simulator Optitek"

Tuyển tập các báo cáo nghiên cứu về lâm nghiệp được đăng trên tạp chí lâm nghiệp Original article đề tài:"Modeling lumber recovery in relation to selected tree characteristics in jack pine using sawing simulator Optitek" | Ann. For. Sci. 62 2005 219-228 219 INRA EDP Sciences 2005 DOI forest 2005013 Original article Modeling lumber recovery in relation to selected tree characteristics in jack pine using sawing simulator Optitek Shu-Yin Zhang Que-Ju Tong Forintek Canada Corp. 319 rue Franquet Sainte-Foy Québec Canada G1P 4R4 Received 26 May 2004 accepted 31 August 2004 Abstract - End uses and product recovery are important considerations in forest management decision-making. This study intended to develop general tree-level lumber volume recovery models for jack pine. A sample of 154 jack pine trees collected from natural stands was scanned to obtain 3-D stem geometry for sawing simulation under two sawmill layouts a stud mill and a random mill with optimized bucking using sawing simulator Optitek. Three model forms were chosen to describe the quantitative relationship between simulated lumber volume recovery and tree characteristics. It was found that lumber volume recovery of individual trees from both sawmills could be well estimated from DBH using a second-order polynomial equation. Adding tree height into the model resulted in a small but significant improvement in the goodness of the model. Adding tree taper into the model that already included DBH and tree height no longer improved the goodness significantly. The power function form involving only DBH or both DBH and tree height as variables was also found to be suitable for the stud mill exponential forms were least suitable. The second-order polynomial model with DBH alone was the most suitable model when inventory records DBH only while the second-order polynomial model and the power model involving two variables DBH and tree height for the random mill and the stud mill respectively were better when both DBH and tree height are available. tree characteristics sawing simulation Optitek lumber recovery general model Résumé - Modélisation du rendement en sciages en relation avec certaines caractéristiques du pin baumier

• Báo cáo khoa học
• Báo cáo lâm nghiệp hay
• cách trình bày báo cáo
• báo cáo lâm nghiệp
• công trình nghiên cứu lâm nghiệp
• tài liệu về lâm nghiệp