TAILIEUCHUNG - Short Reach Mode

Brad Booth is a senior principal engineer at Applied Micro Circuits Corporation (AMCC) and drives alignment of AMCC strategic planning to industry initiatives and standards. Previously, Brad was the director of advanced products for Quake Technologies and the manager of Intel’s Enterprise Interconnect Standards Team. Brad chaired the IEEE Std. ™-2006 (10GBASE-T) project, which developed a standard for 10 Gigabit Ethernet over twisted-pair balanced copper cabling. Prior to that, Brad was the editor-in-chief for IEEE Std. ™-2002 for 10 Gigabit Ethernet on fiber optic cabling. Currently, Brad serves as the president for the Ethernet Alliance. Previously, he has held positions as director and as VP of technology. | Short Reach Mode 10 Gigabit Ethernet Over Copper 10 Gigabit Ethernet Over Copper Short Reach Mode With Tehuti Networks and Applied Micro Circuits Corporation AMCC A late addition to the recently released IEEE standard for 10GBASE-T Short Reach Mode is designed to run 10 gigabits per second 10 Gbps with presumably less power than the full power version of 10GBASE-T. Short Reach Mode was added for cost-effective early implementations of 10 Gigabit Ethernet over copper in the data center. This white paper addresses the technology behind Short Reach 10GBASE-T and helps guide you in properly implementing a 10GBASE-T infrastructure. Within this paper you will learn What is 10GBASE-T Short Reach Mode and why was it added to the standard Why Short Reach Mode requires Augmented Category 6 Cat 6A or ISO Class F cabling What are the advantages and disadvantages of Short Reach Mode What applications are best suited for Short Reach Mode 10 Gigabit Over Copper - Short Reach Mode 10 Gigabit over Copper Short Reach Mode Following nearly four years of intensive development the IEEE standards association recently ratified the 10 Gigabit Ethernet 10GBASE-T standard IEEE which specifies 10 Gbps data transmission over four-pair copper cabling. Short Reach Mode was a late addition to the standard and many in the industry are unaware of its requirements potential advantages and applications. This white paper addresses the technology behind Short Reach 10GBASE-T and helps guide you in properly implementing a 10GBASE-T infrastructure. What is Short Reach Mode The 10GBASE-T optional Short Reach Mode also referred to as Low Power Mode is designed to run 10 Gbps with less power than the full version of 10GBASE-T. Short Reach Mode is based on a cabling link of 30 meters Cat 6A or ISO Class F shielded cabling. The link consists of two connectors 10 meters of patch cords and 20 meters of horizontal cabling see Figure 1 . Figure 1 Short Reach Mode Test Configuration Why was it .

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.