TAILIEUCHUNG - Abstract of doctor thesis in Mechanical engineering and Engineering mechanics: Crack detection in bars, beams by measurement of frequency response function

The aims of this study are to develop and apply the method of using frequency response functions to diagnose cracks in elastic bar and beams structure. The contents of the study includes: building models of cracked elastic bar and 3 beams structure; studying the changes of oscillation parameters, mainly frequency response functions due to cracks. | MINISTRY OF EDUTATION VIETNAM ACADEMY OF SCIENCE AND TRAINING AND TECHNOLOGY GRADUATE UNIVERSITY OF SCIENCE AND TECHNOLOGY ----------------------------- LE KHANH TOAN CRACK DETECTION IN BARS BEAMS BY MEASUREMENT OF FREQUENCY RESPONSE FUNCTION Specialization Engineering Mechanics Code 9 52 01 01 ABSTRACT OF DOCTOR THESIS IN MECHANICAL ENGINEERING AND ENGINEERING MECHANICS HANOI - 2019 The thesis has been completed at Graduate University of Science and Technology - Vietnam Academy of Science and Technology Supervisions 1 . Nguyen Tien Khiem 2 . Nguyen Viet Khoa Reviewer 1 Reviewer 2 Reviewer 3 Thesis is defended at Graduate University of Science and Technology - Vietnam Academy of Science and Technology at on date month 2019 Hardcopy of the thesis be found at - Library of Graduate University of Science and Technology - Vietnam National Library INTRODUCTION 1. Significance of the study Damage in structures especially cracks can cause the construction to collapse if not detected in time. This is proved by the results of studies of accidents that have occurred in important projects such as offshore rigs. However it is difficult to determine the position and the extent of a crack in a structure because the crack usually stays in the structures that the naked eye cannot detect. Therefore to diagnose cracks people often use non-destructive testing methods. One of these methods which is comprehensive and applicable to complex construction is based on measuring the oscillation parameters of a building to determine the position and extent of the damage in construction. The oscillation parameters commonly used in structural failure diagnosis are specific frequencies and patterns of oscillations or frequency response functions. These parameters are characteristics which are quite comprehensive for the technical condition of a building without depending on external stimuli. However identifying these characteristics from measurement data often understood as

TÀI LIỆU LIÊN QUAN
TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.