TAILIEUCHUNG - A set of identification and control design methods for an industrial air heating process with time delay: Stability analysis and design specifications

This paper presents a set of real-time system identification and feedback control schemes for an industrial air heating process with time delay. Continuous time parametric model is obtained by using graphical based methods which are known process reaction curves. Discretetime system model is obtained by employing online identification methods based on recursive extended least squares. | Journal of Automation and Control Engineering Vol. 4, No. 3, June 2016 A Set of Identification and Control Design Methods for an Industrial Air Heating Process with Time-Delay: Stability Analysis and Design Specifications Necdet Sinan Özbek Department of Electrical and Electronics Engineering, Adana Science and Technology University, Adana, Turkey Email: nozbek@ İlyas Eker Department of Electrical and Electronics, Çukurova University, Adana, Turkey Email: eker@ iii) Abstract—This paper presents a set of real-time system identification and feedback control schemes for an industrial air heating process with time delay. Continuous time parametric model is obtained by using graphical based methods which are known process reaction curves. Discretetime system model is obtained by employing online identification methods based on recursive extended least squares. The models are employed in elaborated feedback control schemes. A predictive proportional integral (PI) control and Smith predictor scheme, which can be employed for delay system, are presented. Stability characterization is addressed. A performance comparison between Smith Predictor and the Predictive PI controller is presented. The problems chosen for prototyping time delay control strategies are also widely used benchmark problems of control theory and this aspect of the paper makes it a beneficial guide to a large number of readers. Index Terms—system identification, recursive least squares, predictive PI control, smith predictor, stability analysis. I. INTRODUCTION Time delay systems have been encountered in various applications across different areas such as; robotics, electrical networks, wireless transmission of sensor data’s, congestion control in communication networks, trafficflow and car following models, distributed and cooperative control for the coordination of unmanned vehicles, adaptive combustion control, haptics interfaces and motion synchronization, and .

• Cơ khí - Chế tạo máy
• Journal of Automation and Control Engineering
• Control design methods
• for Industrial air heating process with time delay
• Stability analysis and design specifications
• Recursive least squares
• Predictive PI control
• Increasing the productivity of automation tool by developing socket
• Automation tool by developing socket
• Auto report generated
• The automation tool
• Abnormality management in industrial automation systems
• Industrial automation systems
• Future industrial automation systems
• Abnormality management approach
• Sliding mode based relative pose synchronous control
• Space autonomous rendezvous
• Relative pose synchronous control
• The control system design
• The sliding mode control law
• Application of pressure control type quasiservo valve
• Force control system
• The quasi servo valve
• The pneumatic cylinder
• Robust vehicle suspension system
• Converting active & passive control
• A vehicle to semi active control system analytically
• Semi Active Vehicle System
• Environmental control of a greenhouse system
• NI embedded systems technology
• The soil moisture
• The Engineering School of Bahrain Polytechnic
• Design of control system for 3D printer
• DSP and FPGA
• Control system for 3D printer
• Closed loop control
• Improving performances of a cement rotary kiln
• A model predictive control solution
• Cement rotary kiln
• Advanced process control
• Model predictive control
• Active learning in motor control and matlab simulation
• Active learning in motor control
• Servo motors of the simulation of neural networks
• Motion of a robot arm
• Redundancy and operation of power control system
• A deep space small probe
• Functions of redundancy
• Power Control Unit
• Closed loop speed control of miniature brushless DC motors
• Closed loop speed control
• Miniature brushless DC motors
• Delta Connected BLDC motors
• Adaptive wavelet backstepping control
• Class of mimo underactuated systems
• Multi input multi output
• Proposed control scheme
• Adaptive backstepping controller
• Hybrid position force control for a stewart platform
• Hybrid position force control
• The work surface
• The stewart platform
• Robust control of double inverted pendulum system
• Double inverted pendulum system
• Reference trajectory control
• The dynamic modeling
• Speech recognition in human computer interactive control
• Computer interactive control
• HTK and Sphinx
• Vietnamese speech recognition
• Human computer interaction
• Command shaped robust control of a flexible spacecraft
• Command shaped robust control
• Strong cross couplings
• Loop shaping design
• Optimal control of vehicle active suspension system
• Vehicle active suspension system
• The active suspension system
• LQR control technique
• Mimo fuzzy control for autonomous mobile robot
• Mimo fuzzy control
• Autonomous mobile robot
• Implementation of multi input multi output
• Reach defined target
• Asynthesis method of robust cascade control system
• Robust cascade control system
• Imposes robust conditions
• Soft oscillation index
• Efficient adaptive fuzzy control scheme for industrial manipulators
• Degree of freedom
• Fuzzy control scheme
• IMO nonlinear second order systems
• Multilevel inverter topology and control techniques
• Reduce electromagnetic interference
• Control strategies employed
• Linear quadratic optimal control problem of stochastic switching systems
• Linear quadratic optimal control problem
• Stochastic switching systems
• Non invariant linear systems
• Investigation of hybrid adaptive control schemes
• Needle free jet injection system
• Hybrid adaptive control schemes
• Needle free jet injection
• Modelling and simulations
• Development of a new algorithm
• Control excitation of particular mode of a building
• Particular mode of a building
• Sliding mode control
• Control of electric motor machine tools
• Self organizing fuzzy logic controller
• Modify the control rule
• The self organizing fuzzy logic controller