TAILIEUCHUNG - Free vibration of functionally graded sandwich plates with stiffeners based on the third-order shear deformation theory

In this paper, the free vibration of functionally sandwich grades plates with stiffeners is investigated by using the finite element method. The material properties are assumed to be graded in the thickness direction by a power-law distribution. Based on the third-order shear deformation theory, the governing equations of motion are derived from the Hamilton’s principle. | Vietnam Journal of Mechanics, VAST, Vol. 38, No. 2 (2016), pp. 103 – 122 DOI: FREE VIBRATION OF FUNCTIONALLY GRADED SANDWICH PLATES WITH STIFFENERS BASED ON THE THIRD-ORDER SHEAR DEFORMATION THEORY Pham Tien Dat, Do Van Thom∗ , Doan Trac Luat Le Quy Don Technical University, Hanoi, Vietnam ∗ E-mail: promotion6699@ Received August 11, 2015 Abstract. In this paper, the free vibration of functionally sandwich grades plates with stiffeners is investigated by using the finite element method. The material properties are assumed to be graded in the thickness direction by a power-law distribution. Based on the third-order shear deformation theory, the governing equations of motion are derived from the Hamilton’s principle. A parametric study is carried out to highlight the effect of material distribution, stiffener parameters on the free vibration characteristics of the plates. Keywords: Stiffened plate, sandwich, vibration, functionally graded materials. 1. INTRODUCTION Functionally graded materials (FGMs) made of two constituents, mainly metal and ceramic are widely used. The composition is varied continuously along certain directions according to volume fration from a ceramic-rich surface to a metal-rich surface. Many researchers in past have worked upon to understand behavior of functionally graded plates. Reddy [1] carried out nonliear finite element static and dynamic analyses of functionally graded plates using Navier’s solution, Vel and Batra [2] presented threedimendional exact solutions for free and forced vibrations of simply supported functionally graded rectangular plates, Tinh Quoc Bui et al [3] used finite element method to study static bending and vibration of heated FG plates. Dao Huy Bich et al [4, 5], Nguyen Dinh Duc et al [6, 7] used analytical method to study vibration, nonlinear respones of eccentrically stiffened functionally graded cylindrical panels [4, 5] and nonlinear postbucking of FGM plate and .

• Cơ khí - Chế tạo máy
• Vietnam Journal of Mechanics
• Free vibration of functionally graded sandwich plates with stiffeners
• The third order shear deformation theory
• The Hamilton’s principle
• The governing equations
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure