TAILIEUCHUNG - Synthesis the reversed stationary phase for solid phase extraction using trimethoxyoctadecyl silane

The material was also undergone the end-capping process to reduce unreacted silanol groups. Final product owned % of carbon content and 75 % of the unreacted silanols. Retention behavior of product was tested and compared to the same noes available on the market. Results showed that both resulted material and commercial had the same retention properties. | TAÏP CHÍ PHAÙT TRIEÅN KH&CN, TAÄP 19, SOÁ T1 - 2016 Synthesis of the reversed stationary phase for solid phase extraction using trimethoxyoctadecyl silane Nguyen Tien Giang Nguyen Huy Du Nguyen Anh Mai University of Science, VNU-HCM (Received on July 20 th 2015, accepted on March 31 th 2016) ABSTRACT Octadecyl grafting silica was synthesized using groups. Final product owned % of carbon trimethoxyoctadecyl silane. Reaction conditions were content and 75 % of the unreacted silanols. Retention optimized so that the carbon percentage of resulted behavior of product was tested and compared to the material was similar to that of commercial products. same noes available on the market. Results showed Temperature and catalyst played very important roles that both resulted material and commercial had the same retention properties. in the reaction. The material was also undergone the end-capping process to reduce unreacted silanol Key words: reversed stationary phase, octadecyl modified silica, alkoxysilane, solid phase extraction INTRODUCTION Solid phase extraction (SPE) is a well-established sample pretreatment technique because it demands less organic solvents and can remove interferences simultaneously. In SPE chemical structure of sorbent materials play a decisive role[1]. Currently, the most popular sorbent material is conventional reversed phase (CRP) on silica support. In the current study, CRP sorbent was synthesized using alkoxyoctadecyl silane and its retention properties were compared with commercial CRPs. CRP is synthesized by directly bonding alkoxyoctadecyl silane or chlorooctadecyl silane onto silica surface[2-5]. While chlorolsilane is very reactive, alkoxysilane is one of the least reactive reagents[3]. However, during the reaction with silica, chlorosilane produces HCl by-product which can damage the main product. For alkoxysilane, the byproduct is alcohol which is harmless and easy to remove in distilled conditions. Besides, the .

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.