TAILIEUCHUNG - Lecture Electrical Engineering: Lecture 24 - Dr. Nasim Zafar

It is shown that the use of the small signal transmission line equivalent circuit model is not restricted solely to the small signal . analysis of semiconductor devices. Simple algorithms are described which allow it to be used to compute the . and the large signal transient properties of semiconductor devices to any desired precision. | Dr. Nasim Zafar Electronics 1 - EEE 231 Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad Application of the Small-Signal Equivalent Circuits: Examples Lecture No. 24 Contents: Examples: BJT as an Amplifier. Examples: Small-Signal Equivalent Circuit Models. Nasim Zafar 2 Lecture No. 24 Reference: Application of the Small-Signal Equivalent Circuits Microelectronic Circuits Adel S. Sedra and Kenneth C. Smith. Nasim Zafar 3 Introduction The availability of the small-signal BJT circuit models makes the analysis of transistor amplifier circuits a systematic process. The process consists of the following steps: Determine the dc operating point of the BJT and in particular the dc collector current IC. Calculate the values of the small-signal model parameters: gm = IC ⁄ VT , rπ = β ⁄ gm, and re = VT /IE ≅ 1 ⁄ gm. 4 Nasim Zafar Introduction 3. Draw ac circuit path. Eliminate the dc sources by replacing each dc voltage source with a short circuit and each dc current source with an open circuit. Replace the BJT with one of its small-signal equivalent circuit models. Analyze the resulting circuit to determine the required quantities ., voltage gain, input resistance. Nasim Zafar 5 Nasim Zafar 6 DC Analysis of BJT Using simple constant-voltage drop model, assuming , irrespective of the exact value of currents. Assuming the device operates at the active region, we can apply the relationship between IB, IC, and IE, to determine the voltage VCE or VCB. DC Analysis of BJT The AC signal, vbe , is removed for dc bias analysis Nasim Zafar 7 (a) Transistor Amplifier Circuit (b) Circuit for DC Analysis Figure The Hybrid-p Model A transistor hybrid-p model: - a voltage controlled current source. 8 Nasim Zafar Hybrid-Pi Model for the BJT The small-signal parameters are controlled by the Q-point and are independent of the geometry of the BJT. Transconductance: Input resistance: Rin Output resistance: 9 Nasim .

• Điện - Điện tử
• Electrical engineering
• Electronic devices
• Lecture Electrical Engineering
• Semiconductor materials
• DC Analysis
• electrical
• electronic and electrical industry
• electrical professional
• specialized dictionaries li arts
• Electrical Engineering Dictionary
• The electrical engineering handbook
• The electrical engineering
• The hall effect
• Power systems
• Electrical machines
• Digital devices
• Computer engineering
• Electrical Engineering Dictionar
• Summary of mechanical engineering and engineering mechanics doctoral thesis
• The mechanical model and calculating design
• Electrical generator for sea wave energy
• The electrical generator
• Vietnams sea condition
• Passive components
• Voltage and current sources
• Linear circuit analysis
• Passive signal processing
• Microelectronic circuits
• Integrated electronics
• Biasing stability
• Fixed bias circuits
• Amplifier gain
• Common emitter amplifier
• Common emitter characteristics
• Small signal operation
• BJT amplifier circuits
• Discrete circuit design
• Transistor amplifier
• Characteristic parameters
• BJT internal capacitances
• High frequency BJT model
• Qualitative operation of MOSFET
• Channel for current flow
• MOS field effect transistors
• Current voltage characteristics
• Circuit symbol
• MOSFET Circuit
• Voltage biasing scheme
• Fixing voltage
• Semiconductor devices
• Carrier transport in semiconductors
• Bipolar Junction Transistors