TAILIEUCHUNG - The Basics of Oil Spill Cleanup - Chapter 6

Ngăn chặn trên nước Ngăn chặn một vụ tràn dầu đề cập đến quá trình nhốt dầu, hoặc là để ngăn ngừa lây lan đến một khu vực cụ thể, để chuyển hướng đến khu vực khác nó có thể được phục hồi hoặc xử lý nơi, hoặc tập trung dầu, do đó nó có thể được phục hồi, đốt cháy, hoặc nếu không được điều trị. Ngăn chặn bùng nổ là phần cơ bản và được sử dụng thường xuyên nhất của thiết bị có chứa một vụ tràn dầu trên mặt nước. Bùng nổ nói chung là thiết bị. | CHAPTER 6 Containment on Water Containment of an oil spill refers to the process of confining the oil either to prevent it from spreading to a particular area to divert it to another area where it can be recovered or treated or to concentrate the oil so it can be recovered burned or otherwise treated. Containment booms are the basic and most frequently used piece of equipment for containing an oil spill on water. Booms are generally the first equipment mobilized at a spill and are often used throughout the operation. This chapter covers the types of booms their construction operating principles and uses as well as how and why they fail. It also covers ancillary equipment used with booms sorbent booms and special-purpose and improvised booms. The topic of fire-resistant booms for use when burning oil on water is covered in Chapter 10 Ỉn-Situ Burning. TYPES OF BOOMS AND THEIR CONSTRUCTION A boom is a floating mechanical barrier designed to stop or divert the movement of oil on water. Booms resemble a vertical curtain with portions extending above and below the water line. Most commercial booms consist of four basic components a means of flotation a freeboard member or section to prevent oil from flowing over the top of the boom a skirt to prevent oil from being swept underneath the boom and one or more tension members to support the entire boom. Booms are constructed in sections usually 15 or 30 m long with connectors installed on each end so that sections of the boom can be attached to each other towed or anchored. A section of a typical boom is shown in Figure 13. Some typical commercial booms are illustrated in Figure 14. The flotation members or floats determine the buoyancy of the boom and keep it floating on the water surface. They are located along the centre line outboard on one side or on outriggers. Booms either have solid floats or the boom itself is inflatable. Solid floats are usually made of a plastic foam such as expanded poly- 2000 by CRC Press LLC .

TÀI LIỆU LIÊN QUAN
TỪ KHÓA LIÊN QUAN
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.