TAILIEUCHUNG - CRC HANDBOOK of LUBRICATION

Volume II of the Handbook of Lubrication (Tribology) provides coverage of basic theory involved in friction, wear, and lubrication; characteristics and application practices for lubricants; and design principles for lubricated machine elements such as bearings, gears, couplings, and seals. Among significant developments covered in Volume II are new understandings of boundary lubrication and wear; new elastohydrodynamic theory for rolling bearings, gears, and cams; extension of hydrodynamic analysis to high-speed operation in the turbulent regime and to dynamic response; and distinctive trends in the use of oils, greases, solid lubricants, additives, and synthetics. This volume is intended to be used as a. | CRC HANDBOOK l of__ LUBRICATION Theory and Practice of Tribology VolumelI Theory Design Editor E. Richard Booser . Senior Engineer Electromechanical Systems Engineering Turbine Technology Laboratory General Electric Company Schenectady New York CRC PRESS Boca Raton London New York Washington . Copyright 1983 CRC Press LLC Library of Congress Cataloging-in-Publication Data Revised for Volume 2 Main entry under title CRC Handbook of Lubrication Tribology Tiile of v 2 varies CRC handbook of lubrication theory and practice of tribology Bibliography v. 1. p. v. 2 p. Includes index. ISBN 0-8493-3902-2 Contents v. 1. Applications and maintenance v. 2. Theory and design. 1. Lubrication and lubricants Handbooks manuals etc. I. Booser. E. Richard. 1983 9 82-4552 This book contains information obtained from authentic and highly regarded sources. Reprinted material is quoted with permission and sources are indicated. A wide variety of references are listed. Reasonable efforts have been made to publish reliable data and information but the authors and the publisher cannot assume responsibility for the validity of all materials or for the consequences of their use. Neither this book nor any part may be reproduced or transmitted in any form or by any means electronic or mechanical including photocopying microfilming and recording or by any information storage or retrieval system without prior permission in writing from the publisher. All rights reserved. Authorization to photocopy items for internal or personal use. or the personal or internal use of specific clients may be granted by CRC Press LLC provided that .50 per page photocopied is paid directly to Copyright Clearance Center. 222 Rosewood Drive. Danvers MA 01923 USA The fee code for users of the Transactional Reporting Service is ISBN 0-8493-3902-2 83 .50. The fee is subject to change without notice. For organizations that have been granted a photocopy license by the CCC a separate

• Cơ khí - Chế tạo máy
• CRC HANDBOOK
• design principles
• solid lubricants
• technical review
• sỗ tay bôi trơn
• kỹ thuật bôi trơn
• the CRC handbook
• modern telecommunications
• voice and data communications
• Patricia Morreale Kornel Terplan
• Acknowledgments
• Foreword
• The CRC handbook of thermal engineering
• Engineering thermodynamics
• Fluid mechanics
• Heat and mass transfer
• Economic analysis of thermal systems
• Control volume applications
• Property relations and data
• Water desalination
• Environmental heat transfer
• Bioheat transfer
• Cryogenic systems
• Heat transfer enhancement
• CRC Press
• Robotics and automation handbook
• The history of robotics
• Rigid body kinematics
• Inverse kinematics
• Lagrangian dynamics
• Trajectory planning
• Adaptive motion control
• Sliding mode control of robotic manipulators
• Interaction control
• Robot simulation
• The subject of rock mechanics
• Content of this book
• Geological setting
• Natural rock environments
• Stress as a point property
• tài liệu cơ khí
• cơ khí chế tạo máy
• sổ tay cơ khí
• hướng dẫn cơ khí
• luyện thi cơ khí
• đề thi cơ khí