TAILIEUCHUNG - A comparative analysis of twin shaft rotavator over single shaft rotavator using discrete element (Dem) simulation

Depending on soil properties farmer may need to operate rotavator multiple times on the soil bed to achieve desirable pulverisation, which induces fatigue and time loss. To aid the farmer in such situation a twin shaft rotavator was conceptualised. Hence, a simulation was planned to compare the effects of different configuration of rotavator in operation. Simulations were carried out in EDEM a discrete element method analysis software. The simulations were made assuming6 inches depth of cut at a forward speed of 3 kmph. Results revealed that in dry soil condition single/twin shaft rotavator experienced same blade force but there was significant difference in the draft& vertical force, whereas, for wet soil condition there was difference in blade force, draft force& vertical force between single and twin shaft rotavator. |

TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.