TAILIEUCHUNG - The method of determining internal forces at any cross section of links in mechanisms

In the paper it is introduced a method of determining internal forces at any cross section of the links of mechanisms. As known, so far it is used the method of D'Alembert, which consists of two steps, the determination of the acceleration states of links and the establishment of the equilibrium equations for the set of forces including the forces of inertia and the internal forces at the cross section. A. I. Lurie proposed a method of analytical mechanics for this problem. | . Vietnam Journal of Mechanics, VAST, Vol. 26, 2004, No 2 (111 - 121) THE METHOD OF DETERMINING INTERNAL FORCES AT ANY CROSS SECTION OF LINKS IN MECHANISMS Do SANH, Do DANG KttoA Hanoi University of Technology ABSTRACT. In the paper it is introduced a method of determining internal forces at any cross section of the links of mechanisms. As known, so far it is used the method of D'Alembert , which consists of two steps, the determination of the acceleration states of links and the establishment of the equilibrium equations for the set of forces including the forces of inertia and the internal forces at the cross section. A. I. Lurie proposed a method of analytical mechanics for this problem. Its concept is to make a new system called the released one by cutting the link at a cross section under consideration and adding some coordinates . Only one condition putting restriction on the released system is the additional coordinates must equal zero. Under this restriction the new created system is coincided to the original one. This restriction is equivalent to put the mechanical constraints, whose reaction forces are the components of internal forces at t he cross section under consideration. It is necessary emphasize that the Lurie's method is convenient only for opened loops, but is not applied for closed ones. Moreover, the Lagrange's multiplier equations applied by A. I. Lurie are unsuitable. In this paper it is presented the generalized Lurie's method, which is applied for the opened and closed loops by using the Principle of Compatibility. 1 Introduction The problem of determining internal forces at any cross section of links of mechanism is very important because in modern dynamics the cross section of links is designed increasingly small while their angular velocities are more and more larger. In t he past, for determining the components of internal forces (the tensible, shearing force and bending moment ) the D 'Alembert 's method is applied. For doing .

• Cơ khí - Chế tạo máy
• Vietnam Journal of Mechanics
• The method of determining internal forces
• Any cross section of links in mechanisms
• The method of DAlembert
• The forces of inertia
• The cross section
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure