TAILIEUCHUNG - An analytic homogenization model in traction and bending for orthotropic composite plates with the type of double corrugated cardboard

In this paper, an analytic homogenization model in traction and flexion for the double corrugated cardboard plates is presented. The proposed analytical homogenization model allows modelling the 3D double corrugated cardboard with a 2D homogenized plate. | Vietnam Journal of Mechanics, VAST, Vol. 38, No. 3 (2016), pp. 205 – 213 DOI: AN ANALYTIC HOMOGENIZATION MODEL IN TRACTION AND BENDING FOR ORTHOTROPIC COMPOSITE PLATES WITH THE TYPE OF DOUBLE CORRUGATED CARDBOARD Duong Pham Tuong Minh, Ngo Nhu Khoa∗ Thai Nguyen University of Technology, Vietnam ∗ E-mail: Received June 24, 2015 Abstract. In this paper, an analytic homogenization model in traction and flexion for the double corrugated cardboard plates is presented. The proposed analytical homogenization model allows modelling the 3D double corrugated cardboard with a 2D homogenized plate. This model is essentially based on the theory of stratification and then improved by using the theory of sandwich. This model was validated by comparing the results of Abaqus-3D and H-2D model using ”user’s subroutine” ”UGENS”. The homogenization model can be used not only for corrugated cardboard plates, but also for naval and aeronautic composite structures. Keywords: Analytical homogenization, corrugated cardboard, orthotropic plates. 1. INTRODUCTION Nowadays, the corrugated cardboard is widely used in the packaging industry, such as corrugated cardboard boxes, insert cardboard sheet in pallet systems. It is essential to predict the mechanical behavior of these systems in order to use such materials effectively. The numerical modeling of this kind of orthotropic composite plates by shell elements is too tedious and time consuming. Many homogenization models were obtained by analytical, numerical and experimental methods [1–5]. By using some FE models and commercial FE software, the mechanical behaviors of corrugated cardboard were studied by other authors [6, 7], but it just limited with the single corrugated cardboard. The corrugated cardboard is produced by a converting process in which three or more layers are laminated together. The flat layers are called liners and the corrugated cores are referred to as flutes (Fig. .

• Cơ khí - Chế tạo máy
• Vietnam Journal of Mechanics
• An analytic homogenization model
• Traction and bending
• Orthotropic composite plates
• The type of double corrugated cardboard
• Analytical homogenization model allows
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure