TAILIEUCHUNG - Airy-based equilibrium mesh-free method for static limit analysis of plane problems

This paper presents a numerical procedure for lower bound limit analysis of plane problems governed by von Mises yield criterion. The stress fields are calculated based on the Airy function which is approximated using the moving least squares technique. | Vietnam Journal of Mechanics, VAST, Vol. 38, No. 3 (2016), pp. 167 – 179 DOI: AIRY-BASED EQUILIBRIUM MESH-FREE METHOD FOR STATIC LIMIT ANALYSIS OF PLANE PROBLEMS Canh V. Le1,∗ , Phuc L. H. Ho2 , Hoa T. Nguyen3 1 International University, Vietnam National University - Ho Chi Minh City, Vietnam 2 Ho Chi Minh City University of Technology and Education, Vietnam 3 Ho Chi Minh City Open University, Vietnam ∗ E-mail: lvcanh@ Received March 16, 2015 Abstract. This paper presents a numerical procedure for lower bound limit analysis of plane problems governed by von Mises yield criterion. The stress fields are calculated based on the Airy function which is approximated using the moving least squares technique. With the use of the Airy-based equilibrium mesh-free method, equilibrium equations are ensured to be automatically satisfied a priori, and the size of the resulting optimization problem is reduced significantly. Various plane strain and plane stress with arbitrary geometries and boundary conditions are examined to illustrate the performance of the proposed procedure. Keywords: Limit analysis, equilibrium mesh-free method, second-order cone programming, Airy function. 1. INTRODUCTION The estimation of the load required to cause collapse of a body or structure plays an important role in design and assessment the safety of many engineering components and structures. If a suitable approximation for the stress field is used, and the static theorem is applied, a lower-bound on the exact limit load can be obtained. In the framework of equilibrium limit analysis formulation, the assumed stress fields are expressed in terms of spatial coordinates and parameters that are usually associated with nodal stress values. These approximated fields are required to satisfy equilibrium conditions over the problem domain. The equilibrium equations are frequently treated in one of two ways in numerical procedures: (i) equilibrium is enforced at .

• Môi trường
• Vietnam Journal of Mechanics
• Airy based equilibrium mesh free method
• Static limit analysis of plane problems
• The moving least squares technique
• Von Mises yield criterion
• Plane problems governed
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure