TAILIEUCHUNG - Thermal buckling of imperfect functionally graded cylindrical shells according to wan-donnell model

The thermal loads include the uniform temperature rise and nonlinear temperature change across the thickness of shell. A closed form solution for the thermal buckling of simply supported cylindrical FG shell under the described thermal loads is obtained. The influences of the relative thickness, the imperfection size and the power law index on buckling thermal loads are all discussed. | Vietnam Journal of Mechanics, VAST, Vol. 30, No. 3 (2008), pp. 185 – 194 THERMAL BUCKLING OF IMPERFECT FUNCTIONALLY GRADED CYLINDRICAL SHELLS ACCORDING TO WAN-DONNELL MODEL Hoang Van Tung Hanoi Architectural University, Vietnam Nguyen Dinh Duc Vietnam National University, Hanoi Abstract. A thermal buckling analysis of imperfect circular cylindrical shells of functionally graded material is considered. The material properties are assumed varying as a power form of thickness coordinate variable. The Donnell equilibrium and stability equations are considered and the Wan-Donnell model for initial geometrical imperfection is adopted. The thermal loads include the uniform temperature rise and nonlinear temperature change across the thickness of shell. A closed form solution for the thermal buckling of simply supported cylindrical FG shell under the described thermal loads is obtained. The influences of the relative thickness, the imperfection size and the power law index on buckling thermal loads are all discussed. 1. INTRODUCTION The initial geometric imperfections are inherent in many real structures. Therefore, many investigations are conducted on the stability analysis of imperfect structures. Elastic, plastic, and creep buckling of imperfect cylinders under mechanical and thermal loads is studied by Eslami and Shariyat [3]. Mossavarali et al. studied the thermoelastic buckling of isotropic and orthotropic plates with imperfections [8, 9]. Murphy and Ferreira [10] investigated thermal buckling analysis of clamped rectangular plates based on the energy consideration. They determined the ratio of the critical temperature for a perfect flat plate to that one for an imperfect plate as a function of the initial imperfection size. The study includes experimental results. Eslami and Shahsiah [2] reported thermal buckling of imperfect circular cylindrical shells made of isotropic materials. They used the WanDonnell and Koiter models to describle initial geometrical .

• Cơ khí - Chế tạo máy
• Vietnam Journal of Mechanics
• Thermal buckling of imperfect functionally graded cylindrical shells according
• Wan donnell model
• Initial geometrical imperfec
• The relative thickness
• The thermal buckling
• The power law index
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure