TAILIEUCHUNG - Static and dynamic analysis of laminated composite plates with integrated piezoelectrics

The model is validated by comparing with existing results do cumented in the literature. Some numerical results are presented. It is concluded that the shape of the piezoelectric laminated composite plates can reach the desired shape through passive control or active control. The influence of stacking sequence of composite plates and posit ion of piezoelectric layers and sensors/actuators patches on the response of the piezoelectric composite plates is evaluated. | Vietnam Journal of Mechanics, VAST, Vol. 30, No. 3 (2008), pp. 133 – 141 A NEW APPROACH FOR INVESTIGATING CORRUGATED LAMINATED COMPOSITE PLATES OF WAVE FORM Dao Huy Bich Vietnam National University, Hanoi Khuc Van Phu Military Logistic Academy Abstract. Corrugated plates of wave form made of isotropic elastic material were considered as flat orthotropic plates with corresponding orthotropic constants determined empirically by the Seydel’s technique. In some recent researches the extension of this technique was given for corrugated laminated composite plates. In the present paper a new approach for investigating corrugated composite plate of wave form is proposed, regarding this plates as a combination of parts of shallow cylindrical shells with alternative curvatures. It reduces to no use of Seydel’s empirical formulas and sufficiently apply to composite plates. Based on this approach governing equations of corrugated laminated composite plate of wave form are developed and application to the non-linear stability problem of this plate is considered. Obtained results are compared with those of Seydel’s technique. 1. INTRODUCTION Corrugated plates of wave form made of isotropic elastic material were considered as flat orthotropic plates with corresponding orthotropic constants determined empirically by Seydel’s technique. This approach was acceptable to solve many bending and stability problems of corrugated isotropic elastic plates in practice [4, 5, 7]. However, the analysis of corrugated laminated composite plates has received comparitively little attention. In [1] the authors developed the Seydel’s technique to the bending problems of corrugated laminated composite plates and cylindrical shells. In the stability problem of corrugated laminated composite plates [2] besides bending stiffnesses to be extended it is necessary to formulate extensional stiffnesses and to define more exactly the strain expression by including the curvature of middle surface of .

• Điện - Điện tử
• Vietnam Journal of Mechanics
• Static and dynamic analysis of laminated composite plates
• Laminated composite plates with integrated piezoelectrics
• Sensors actuators patches
• The piezoelectric laminated composite plates
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure