TAILIEUCHUNG - New concepts of theory of gearing and a method for reverse synthesis of the gearing

In this paper, the concepts of theory of gearing are developed by the synthesis of the results of our reseachs for years into theorical development and practical application of the generation of gear. A method of the reverse synthesis of the gearing is introduced in the third part. | Vietnam Journal of Mechanics, VAST, Vol. 33, No. 3 (2011), pp. 194 – 202 NEW CONCEPTS OF THEORY OF GEARING AND A METHOD FOR REVERSE SYNTHESIS OF THE GEARING Nguyen Thien Phuc Hanoi University of Science and Technology Abstract. In this paper, the concepts of theory of gearing are developed by the synthesis of the results of our reseachs for years into theorical development and practical application of the generation of gear. A method of the reverse synthesis of the gearing is introduced in the third part. Keywords: Theory of gearing, contact ellipse, elastohydrodynamic film, reverse synthesis. 1. INTRODUCTION The contents of this paper cover the following main topics: 1) Gearing with the required contact ellipse 2) Gearing with the elastohydrodynamic film thickness 3) Generation of gear without the restriction of the use classic method of manufacturing 4) Innovation on the development of gear drives in the trend of the modern mechatronics. Several new concepts of theory of gearing are based on the main results of our research into the mentioned topics [1] and on the lastest developments in its practical applications. Follow these concepts we can develop new approaches for the design and manufacturing of the gears and propose a method for the reverse synthesis of the gearing. 2. NEW CONCEPTS OF THE THEORY OF GEARING . Gearing with the required contact ellipse Up to now most people take great pains in research into the establishment of gearing with contact line. According to the viewpoint, the tooth surfaces are in the line contact at every instant. However, this is not practical because the inaccuracies in the manufacture and assembly are always occurred, so it is impossible to avoid. Such inaccuracies can cause stress concentrations on the edges and tips of the gear teeth. There are many researchs into the localization of tooth contact. The tooth surfaces with the localized contact may be generated by shaping, hobbing or grinding etc. Among these we show .

• Cơ khí - Chế tạo máy
• Vietnam Journal of Mechanics
• New concepts of theory of gearing
• A method for reverse synthesis of the gearing
• The generation of gear
• The generation of gear
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure