TAILIEUCHUNG - EVAPOTRANSPIRATION – REMOTE SENSING AND MODELING

In order to evaluate the status of damage caused by the stresses on the plants growing process before visible damage is noticed, we have followed the evolution of the Chl content in the plant leaves using the Fr/FFr chlorophyll fluorescence ratio. The absolute emission signal of leaves can vary from sample to sample due to small differences such as excitation and sensing angles of the fluorescence, and the roughness and scattering properties of the leaf surface. Thus, the absolute fluorescence usually varies to a large extent than the fluorescence ratio. The fluorescence ratio turns out to produce much lower variations from leaf to leaf, resulting in a. | EVAPOTRANSPIRATION -REMOTE SENSING AND MODELING Edited by Ayse Irmak Evapotranspiration - Remote Sensing and Modeling Edited by Ayse Irmak Published by InTech Janeza Trdine 9 51000 Rijeka Croatia Copyright 2011 InTech All chapters are Open Access distributed under the Creative Commons Attribution license which allows users to download copy and build upon published articles even for commercial purposes as long as the author and publisher are properly credited which ensures maximum dissemination and a wider impact of our publications. After this work has been published by InTech authors have the right to republish it in whole or part in any publication of which they are the author and to make other personal use of the work. Any republication referencing or personal use of the work must explicitly identify the original source. As for readers this license allows users to download copy and build upon published chapters even for commercial purposes as long as the author and publisher are properly credited which ensures maximum dissemination and a wider impact of our publications. Notice Statements and opinions expressed in the chapters are these of the individual contributors and not necessarily those of the editors or publisher. No responsibility is accepted for the accuracy of information contained in the published chapters. The publisher assumes no responsibility for any damage or injury to persons or property arising out of the use of any materials instructions methods or ideas contained in the book. Publishing Process Manager Dragana Manestar Technical Editor Teodora Smiljanic Cover Designer InTech Design Team Image Copyright Selyutina Olga 2011. Used under license from First published December 2011 Printed in Croatia A free online edition of this book is available at Additional hard copies can be obtained from orders@ Evapotranspiration - Remote Sensing and Modeling Edited by Ayse Irmak p. cm. ISBN

• Môi trường
• Manufacturing
• Mechanical Improvement
• Ramie Woven
• Reinforced Starch
• Based Biocomposite
• Biosizing Method
• Pro MANUFACTURING
• tìm hiểu Pro MANUFACTURING
• nghiên cứu Pro MANUFACTURING
• tài liệu Pro MANUFACTURING
• bài giảng Pro MANUFACTURING
• làm quen với Pro MANUFACTURING
• Pro ENGINEER
• Manufacturing systems engineering
• Manufacturing technology
• Production management
• Industrial economics
• Value systems for manufacturing
• Capital investment for manufacturing
• Automation systems for manufacturing
• Fundamentals of manufacturing systems
• Integrated manufacturing
• Technological information flow
• Manufacturing runtime problem with an expedited fabrication rate
• Manufacturing runtime problem with random failures
• Manufacturing runtime problem with scrap
• Manufacturing runtime problem
• Manufacturing runtime decision
• Expedited fabrication rate
• Additive manufacturing technologies
• 3D printing
• Rapid prototyping
• Direct digital manufacturing
• Directed energy deposition processes
• Direct write technologies
• Design for additive manufacturing
• Deployment of Manufacturing Strategies
• Systemic and strategic focus
• Evaluation of Manufacturing Strategies
• Manufacturing Sector of local industry
• Formulation of manufacturing strategies
• Giới thiệu Hệ thống sản xuất tinh gọn
• Hệ thống sản xuất tinh gọn
• Hệ thống Lean Manufacturing
• Phương pháp của Lean Manufacturing
• Công cụ của Lean Manufacturing
• Tiếp cận trong triển khai Lean Manufacturing
• Process planning
• Precision manufacturing
• Precision manufacturing applications
• Future of precision manufacturing
• Flexibility configurations on job shop manufacturing systems
• Preventive maintenance impact on job shop manufacturing systems
• Job shop manufacturing systems
• Preventive maintenance actions
• Designing a manufacturing cell system
• Manufacturing cell system by assigning workforce
• Manufacturing cell system
• Particle swarm optimization
• Meta heuristic methods of Simulated Annealing
• Theoretical framework for safety culture in manufacturing industries
• Safety performance in manufacturing industries
• Facing highest number
• Malaysian manufacturing industries
• Influence of manufacturing methods
• Manufacturing methods
• Manufacturing methods on the microbiological
• Nutritional characteristics
• Dry meat of Niger
• The missing middle phenomenon in Indian manufacturing sector
• Indian manufacturing sector
• The missing middle phenomenon
• Missing middle
• Manufacturing sector
• Profitability and marketability efficiency
• Manufacturing firms
• Policy implications
• Vietnam manufacturing startups
• Economic integration
• Reverse engineering technology
• Computer aided engineering
• Computer numerically controlled machining
• Photopolymer based systems
• Advanced manufacturing technologies
• Modern machining
• Advanced joining
• Sustainable manufacturing
• Micro cutting tools
• Mechanical micro machining
• Thermal assisted machining
• Advanced joining techniques
• Advanced welding techniques
• Lightweight fuel efficient transport
• Advances in 3D printing and additive manufacturing technologies
• Advances in 3D printing
• Hybrid metal matrix composite
• Metal additive manufacturing
• Finite element method
• tạo file gia công mới
• tạo manufacturing model
• thiết lập nguyên công
• đổi màu khi mô phỏng gia công
• công cụ Lean Manufacturing
• quản trị sản xuất
• quản trị chất lượng
• phương pháp quản lý
• quản trị doanh nghiệp
• Chuẩn Hoá Quy Trình
• Phương Pháp 5S
• Petroleum fuels manufacturing
• sustainable manufacturing techniques
• Petroleum products
• Fuel oil and gas production
• petroleum chemical
• Report Design and manufacturing plastic
• Design and manufacturing plastic injectio
• Plastic injection mold hot runner
• Functional parts of the hot runner
• An plastic funnel
• Development Course
• Manufacturing Science
• Development Status
• Digital Manufacturing
• Research Method of Digital
• Pulp and paper manufacturing works
• Paper manufacturing
• Industrial facilities
• Industrial buildings
• Special subject areas
• Environmental issues