TAILIEUCHUNG - Effect of the [U(IV)]/[U(III)] ratio on selective chromium corrosion and tellurium intergranular cracking of Hastelloy N alloy in the fuel LiF-BeF2-UF4 salt

Effect of the [U(IV)/U(III)] ratio of fuel salt on selective chromium corrosion and tellurium intergranular cracking (IGC) of Hastelloy N alloy in the LiF-BeF2-UF4 salt mixture was investigated. The chromium corrosion of Hastelloy N alloy is caused by the oxidation of chromium on the alloy surface by reaction with UF4. | Effect of the U IV U III ratio on selective chromium corrosion and tellurium intergranular cracking of Hastelloy N alloy in the fuel LiF-BeF2-UF4 salt EPJ Nuclear Sci. Technol. 6 4 2020 Nuclear Sciences A. Surenkov et al. published by EDP Sciences 2020 amp Technologies https epjn 2019033 Available online at https REGULAR ARTICLE Effect of the U IV U III ratio on selective chromium corrosion and tellurium intergranular cracking of Hastelloy N alloy in the fuel LiF-BeF2-UF4 salt Aleksandr Surenkov1 Victor Ignatiev1 Mikhail Presnyakov1 Jianqiang Wang2 Zhijun Li2 Xinmei Yang2 and Zhimin Dai2 1 National Research Centre Kurchatov Institute NRC KI Kurchatov sq. 1 123182 Moscow Russia 2 Shanghai Institute of Applied Physics SINAP Chinese Academy of Sciences 201800 Shanghai Jiading . China Received 29 January 2019 Received in final form 13 September 2019 Accepted 27 September 2019 Abstract. Effect of the U IV U III ratio of fuel salt on selective chromium corrosion and tellurium intergranular cracking IGC of Hastelloy N alloy in the LiF-BeF2-UF4 salt mixture was investigated. The chromium corrosion of Hastelloy N alloy is caused by the oxidation of chromium on the alloy surface by reaction with UF4. The tellurium IGC of Hastelloy N alloy is caused by the diffusion of tellurium along the grain boundaries with the formation of unstable tellurides with based metals and alloying additives. Results indicate that the selective chromium corrosion and the tellurium IGC of the Hastelloy N alloy in fuel salt can be controlled by the U IV U III ratio. The tellurium IGC of Hastelloy N alloy exposed in fuel LiF-BeF2-UF4 salt can be avoided. For temperatures up to 760 C the selective chromium corrosion can be minimized to the acceptable level when the U IV U III ratio of fuel salt is bellow 30 40. 1 Introduction Two main problems of Hastelloy N requiring further development turned up during the operation of the MSRE. The advanced metallic material for .

TÀI LIỆU LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.